BN多孔陶瓷的制备研究进展

doi:10.3969/j.issn.1001-1935.2022.02.018

耐火材料 ›› 2022, Vol. 56 ›› Issue (2): 174-179.DOI: 10.3969/j.issn.1001-1935.2022.02.018

BN多孔陶瓷的制备研究进展

张鑫(), 韩磊, 吴帅兵, 蔡伟杰, 张海军()

武汉科技大学省部共建耐火材料与冶金国家重点实验室湖北武汉 430081

收稿日期:2021-09-03 出版日期:2022-04-15 发布日期:2022-04-21
通讯作者: 张海军,男,1970年生,博士,教授。E-mail: zhanghaijun@wust.edu.cn
作者简介:张鑫:男,1999年生,硕士研究生。E-mail: 2016634419@qq.com
基金资助:
国家自然科学基金面上项目(51872210);国家自然科学基金面上项目(52072194);湖北省教育厅高等学校优秀中青年科技创新团队计划项目(T201602)

Research progress on preparation of BN porous ceramics

Zhang Xin(), Han Lei, Wu Shuaibing, Cai Wejie, Zhang Haijun()

The State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081,Hubei,China

Received:2021-09-03 Online:2022-04-15 Published:2022-04-21
Contact: Zhang Haijun

摘要/Abstract

摘要：

BN多孔陶瓷因具有高孔隙率、高比表面积、低热导率、优异的化学稳定性等优点,在吸附、保温隔热、环境修复及电子包装等领域应用潜力巨大。简要综述了近年来BN多孔陶瓷制备方法的进展,概述了模板法与非模板法所制备BN多孔陶瓷的结构及性能,总结了各种制备方法的优缺点,提出了BN多孔陶瓷制备及其应用方面所面临的挑战和未来的发展方向。

关键词: BN多孔陶瓷, 制备方法, 模板法, 非模板法

Abstract:

BN porous ceramics have great application potential in fields such as adsorption,heat insulation,environmental repairing,and electronic packaging owing to their high porosity,high specific surface area,low thermal conductivity,and excellent chemical stability.The recent progress on the preparation of BN porous ceramics was briefly summarized.The structure and performance of BN porous ceramics prepared by template and non-template methods as well as the advantages and disadvantages of these methods were sketched.The challenges and future development direction on the preparation and application of BN porous ceramics were proposed.

Key words: boron nitride porous ceramics, preparation method, template method, non-template method

中图分类号:

TQ126.2+9

张鑫, 韩磊, 吴帅兵, 蔡伟杰, 张海军. BN多孔陶瓷的制备研究进展[J]. 耐火材料, 2022, 56(2): 174-179.

Zhang Xin, Han Lei, Wu Shuaibing, Cai Wejie, Zhang Haijun. Research progress on preparation of BN porous ceramics[J]. Refractories, 2022, 56(2): 174-179.

图/表 1

参考文献 32

[1]	WENG Q H, WANG X B, BANDO Y, et al. One-step template-free synthesis of highly porous boron nitride microsponges for hydrogen storage[J]. Advanced Energy Materials, 2014, 4(7):1301525. DOI URL
[2]	CHEN J, HUANG X Y, ZHU Y K, et al. Cellulose nanofiber supported 3D interconnected BN nanosheets for epoxy nanocomposites with ultrahigh thermal management capability[J]. Advanced Functional Materials, 2017, 27(5):1604754. DOI URL
[3]	何江锋, 张海军, 葛胜涛, 等. SiC多孔陶瓷制备方法研究进展[J]. 耐火材料, 2020, 54(2):163-171.
[4]	任鑫明, 马北越, 张亚然, 等. 煅烧温度对聚合物模板法制备SiC-Al₂O₃多孔陶瓷性能的影响[J]. 耐火材料, 2018, 52(3):196-198+202.
[5]	胡昆鹏. 高比表面氮化硼(BN)的制备及应用性能研究[D]. 武汉: 湖北工业大学, 2013.
[6]	YIN J, LI X M, ZHOU J X, et al. Ultralight three-dimensional boron nitride foam with ultralow permittivity and superelasticity[J]. Nano Letters, 2013, 13(7):3232-3236. DOI URL
[7]	FANG H M, BAI S L. 3D boron nitride foam reinforced flexible insulated polymer with high thermal conductivity[C]// 第二十一届国际复合材料大会论文集,西安, 2017:2-8.
[8]	JIA QR, SHI L. Synthesis and thermal transport properties of high-surface area hexagonal boron nitride foam structures[J]. International Journal of Heat and Mass Transfer, 2020, 161:120268. DOI URL
[9]	SONG Y, LI B, Yang S, et al. Ultralight boron nitride aerogels via template-assisted chemical vapor deposition[J]. Scientific Reports, 2015, 5:10337. DOI URL
[10]	XUE Y M, ZHOU X, ZHAN T Z, et al. Densely interconnected porous BN frameworks for multifunctional and isotropically thermoconductive polymer composites[J]. Advanced Functional Materials, 2018, 28(29):1801205. DOI URL
[11]	PHAM T, GOLDSTEIN A P, LEWICKI J P, et al. Nanoscale structure and superhydrophobicity of sp2-bonded boron nitride aerogels[J]. Nanoscale, 2015, 7(23):10449-10458. DOI URL
[12]	ZETTL A K, ROUSSEAS M, GOLDSTEIN A P, et al. Crystalline boron nitride aerogels,US9840414[P]. 2017-12-12.
[13]	KUTTY G R, SREEJITH S, KONG X H, et al. A topologically substituted boron nitride hybrid aerogel for highly selective CO₂ uptake[J]. Nano Research, 2018, 11(12):6325-6335. DOI URL
[14]	XUE Y M, DAI P C, ZHOU M, et al. Multifunctional superelastic foam-like boron nitride nanotubular cellular-network architectures[J]. ACS Nano, 2017, 11(1):558-568. DOI URL
[15]	MALEKI M, SHOKOUHIMEHR M, KARIMIAN H, et al. Three-dimensionally interconnected porous boron nitride foam derived from polymeric foams[J]. RSC Advances, 2016, 6(56):51426-51434. DOI URL
[16]	HAN W, GE C, ZHANG R, et al. Boron nitride foam as a polymer alternative in packaging phase change materials:Synthesis,thermal properties and shape stability[J]. Applied Energy, 2019, 238:942-951. DOI URL
[17]	石存兰, 薛文东, 刘晓光, 等. 冷冻速率对冻干法制备BN多孔陶瓷显微结构的影响[J]. 耐火材料, 2017, 51(4):241-245.
[18]	石存兰, 薛文东, 刘晓光, 等. 冻干法制备多孔氮化硼陶瓷及其成孔机理[J]. 硅酸盐学报, 2015, 43(12):1701-1705.
[19]	LEI W W, MOCHALIN V N, LIU D, et al. Boron nitride colloidal solutions,ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization[J]. Nature Communications, 2015, 6(1):1-8.
[20]	SUDEEP P M, VINOD S, OZDEN S, et al. Functionalized boron nitride porous solids[J]. RSC advances, 2015, 5(114):93964-93968. DOI URL
[21]	OWUOR P S, PARK O K, WOELLNER C F, et al. Lightweight hexagonal boron nitride foam for CO₂ absorption[J]. ACS nano, 2017, 11(9):8944-8952. DOI URL
[22]	WANG J M, LIU D, LI Q X, et al. Lightweight,superelastic yet thermoconductive boron nitride nanocomposite aerogel for thermal energy regulation[J]. ACS Nano, 2019, 13(7):7860-7870. DOI URL
[23]	QIAN Z, SHEN H, FANG X, et al. Phase change materials of paraffin in h-BN porous scaffolds with enhanced thermal conductivity and form stability[J]. Energy and Buildings, 2018, 158:1184-1188. DOI URL
[24]	KASHFIPOUR M A, DENT R S, MEHRA N, et al. Directional xylitol crystal propagation in oriented micro-channels of boron nitride aerogel for isotropic heat conduction[J]. Composites Science and Technology, 2019, 182:107715.1-107715.10.
[25]	LIN J, YUAN X H, LI G, et al. Self-assembly of porous boron nitride microfibers into ultralight multifunctional foams of large sizes[J]. ACS Applied Materials &Interfaces, 2017, 9(51):44732-44739.
[26]	LI G Y, ZHU M Y, GONG W B, et al. Boron nitride aerogels with super-flexibility ranging from liquid nitrogen temperature to 1 000 ℃[J]. Advanced Functional Materials, 2019, 29(20):1900188. DOI URL
[27]	PAN J, WANG J. Boron nitride aerogels consisting of varied superstructures[J]. Nanoscale Advances, 2020, 2(1):149-155. DOI URL
[28]	ZHAO H J, SONG X F, ZENG H B. 3D white graphene foam scavengers:vesicant-assisted foaming boosts the gram-level yield and forms hierarchical pores for superstrong pollutant removal applications[J]. NPG Asia Materials, 2015, 7(3):168.
[29]	JIANG H, MA L, et al. Three-dimensional porous boron nitride foam for effective CO₂ adsorption[J]. Solid State Communications, 2019, 294:1-5. DOI URL
[30]	XUE Y, DAI P, JIANG X, et al. Template-free synthesis of boron nitride foam-like porous monoliths and their high-end applications in water purification[J]. Journal of Materials Chemistry A, 2016, 4(4):1469-1478. DOI URL
[31]	XU X W, HU R C, CHEN M Y, et al. 3D boron nitride foam filled epoxy composites with significantly enhanced thermal conductivity by a facial and scalable approach[J]. Chemical Engineering Journal, 2020, 397:125447. DOI URL
[32]	TIAN Z, SUN J, WANG S, et al. A thermal interface material based on foam-templated three-dimensional hierarchical porous boron nitride[J]. Journal of Materials Chemistry A, 2018, 6(36):17540-17547. DOI URL

制备方法	模板类型/造孔剂种类	反应温度/℃	反应时间/h	比表面积/(m²·g^-1)	孔隙率/%	体积密度/(mg·cm^-3)	文献
模板法	镍泡沫	1 000	1		99.9	1.6	[6]
	碳泡沫	1 600		716.5		2.0	[13]
	碳泡沫	1 700	4	166.0	98.5	30.4	[14]
	碳泡沫	1 700			75.5	561.0	[10]
	聚苯乙烯树脂	1 150	1.5	180.0			[15]
	三聚氰胺海绵	1 000	2	1 837.8	97.6	1.7	[16]
	冰			273.0		1.4~20.0	[19]
	冰		24			40.0	[20]
	冰		24	124.4		29.0	[21]
	冰		48			6.5	[22]
	冰	1 100	4	773.0	99.3	15.0	[25]
	冰	1 200	3	920.0		15.0	[26]
	冰	1 400	4		98.8	27.5	[27]
造孔剂法	硫脲	1 200	4	-		2.1	[28]
	硫脲	1 200	2	130.0		2.7	[29]
	甲醛-二氰二胺树脂	1 100	6	1 406.0		180	[30]

制备方法	模板类型/造孔剂种类	反应温度/℃	反应时间/h	比表面积/(m²·g^-1)	孔隙率/%	体积密度/(mg·cm^-3)	文献
模板法	镍泡沫	1 000	1		99.9	1.6	[6]
	碳泡沫	1 600		716.5		2.0	[13]
	碳泡沫	1 700	4	166.0	98.5	30.4	[14]
	碳泡沫	1 700			75.5	561.0	[10]
	聚苯乙烯树脂	1 150	1.5	180.0			[15]
	三聚氰胺海绵	1 000	2	1 837.8	97.6	1.7	[16]
	冰			273.0		1.4~20.0	[19]
	冰		24			40.0	[20]
	冰		24	124.4		29.0	[21]
	冰		48			6.5	[22]
	冰	1 100	4	773.0	99.3	15.0	[25]
	冰	1 200	3	920.0		15.0	[26]
	冰	1 400	4		98.8	27.5	[27]
造孔剂法	硫脲	1 200	4	-		2.1	[28]
	硫脲	1 200	2	130.0		2.7	[29]
	甲醛-二氰二胺树脂	1 100	6	1 406.0		180	[30]

BN多孔陶瓷的制备研究进展

Research progress on preparation of BN porous ceramics

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 1

参考文献 32

相关文章 15

编辑推荐

Metrics

本文评价

[1]	武奇, 王光阳, 孙义燃, 王雪晴桑绍柏, 王庆虎, 李亚伟. 工业窑炉用红外辐射涂层的研究进展[J]. 耐火材料, 2022, 56(6): 543-547.
[2]	邹鑫, 陈平安, 徐广平, 李享成, 朱颖丽, 朱伯铨. 碳化硼材料的烧结致密化及其应用研究进展[J]. 耐火材料, 2022, 56(5): 452-457.
[3]	夏淼, 司瑶晨, 孙红刚, 李红霞, 杜一昊, 尚心莲. MgAlON及其复合材料研究进展[J]. 耐火材料, 2021, 55(4): 348-353.
[4]	昝文宇, 马北越. 高纯SiC微粉制备进展[J]. 耐火材料, 2021, 55(2): 161-168.
[5]	张会，薛群虎，张红. 堇青石多孔陶瓷的制备及研究进展[J]. , 2020, 54(5): 448-451.
[6]	刘萍，徐恩霞，谢宏旭，曹雨后. 氮化硅粉体制备方法研究进展[J]. , 2020, 54(5): 457-460.
[7]	何江锋, 张海军, 葛胜涛, 刘杰, 吴文浩, 张少伟. SiC多孔陶瓷制备方法研究进展[J]. , 2020, 54(2): 163-171.
[8]	王森,梁峰,田亮,张根,张海军. 氮化铝晶须制备研究进展[J]. , 2019, 53(2): 154-160.
[9]	任鑫明1),马北越1),张亚然1),李东旭1),于景坤1),刘国齐2),李红霞2). 煅烧温度对聚合物模板法制备SiC-Al2O3多孔陶瓷性能的影响[J]. , 2018, 52(3): 196-198.
[10]	石存兰,薛文东,刘晓光,李勇,孙加林. 冷冻速率对冻干法制备BN多孔陶瓷显微结构的影响[J]. , 2017, 51(4): 241-245.
[11]	尹月,马北越,张博文,李世明,于景坤. 非氧化物多孔陶瓷的研究进展[J]. , 2016, 50(3): 233-240.
[12]	曹迎楠1,2）王军凯1）张海军1）李发亮1）段红娟1）梁峰1）张少伟1）. 溶胶-凝胶法和硼热-碳热还原合成ZrB2空心球粉体[J]. , 2016, 50(1): 20-24.
[13]	杜爽，曹迎楠，张海军，张少伟，张振聪. ZrB2-SiC复相陶瓷制备方法研究现状[J]. , 2014, 48(3): 224-230.
[14]	吴海波，袁波，韩建燊，王刚. 多孔陶瓷材料的制备研究进展[J]. , 2012, 46(3): 230-0.
[15]	刘新宽,马明亮,席生岐,周敬恩 . 氮化铝粉末制备方法研究进展 [J]. , 1998, 32(1): 52-55.