氧化铝陶瓷3D打印技术研究进展

doi:10.3969/j.issn.1001-1935.2026.02.017

耐火材料 ›› 2026, Vol. 60 ›› Issue (2): 179-184.DOI: 10.3969/j.issn.1001-1935.2026.02.017

• 综合评述 • 上一篇

氧化铝陶瓷3D打印技术研究进展

剡秀秀, 王勇, 曹继伟

共享智能装备有限公司宁夏银川 750021

收稿日期:2025-04-03 出版日期:2026-04-15 发布日期:2026-04-15
通讯作者: 曹继伟,男,1989年生,博士,高级工程师。E-mail:caojw89@163.com
作者简介:剡秀秀:女,1997年生,硕士,工程师。E-mail:Maryam@163.com
基金资助:
宁夏回族自治区重点研发计划(2024BEE02009)。

Research progress on 3D printing technology for alumina ceramics

Yan Xiuxiu, Wang Yong, Cao Jiwei

First author’s address:Shared Intelligent Equipment Co.,Ltd.,Yinchuan 750021,Ningxia,China

Received:2025-04-03 Online:2026-04-15 Published:2026-04-15

摘要/Abstract

摘要： 氧化铝陶瓷凭借硬度高、抗磨损、耐高温、化学稳定、电绝缘及生物惰性等优异性能,在众多领域展现出重要的应用价值。重点介绍黏结剂喷射3D打印技术、还原光聚合技术、选择性激光烧结/熔融技术、熔融沉积制造技术在氧化铝陶瓷制备中的研究现状,对比分析了各种工艺的优缺点,最后对3D打印氧化铝陶瓷的发展进行了展望。

关键词: 氧化铝, 3D打印, 烧结助剂, 黏结剂

Abstract: Alumina ceramics demonstrate significant application value across numerous fields due to their exceptional properties,such as high hardness,wear resistance,high-temperature resistance,chemical stability,electrical insulation,and biological inertness.This paper focused on the current research status of the binder jetting 3D printing technology,vat photopolymerization technology,selective laser sintering/melting technology,and fused deposition modeling technology in the fabrication of alumina ceramics.The advantages and disadvantages of each process were compared and analyzed.Finally,the development of 3D-printed alumina ceramics was prospected.

Key words: alumina, 3D printing, sintering additives, binders

中图分类号:

TQ175

剡秀秀, 王勇, 曹继伟. 氧化铝陶瓷3D打印技术研究进展[J]. 耐火材料, 2026, 60(2): 179-184.

Yan Xiuxiu, Wang Yong, Cao Jiwei. Research progress on 3D printing technology for alumina ceramics[J]. Refractories, 2026, 60(2): 179-184.

参考文献

[1] Han Y S,Li J B,Wei Q M,et al.The effect of sintering temperatures on alumina foam strength[J].Ceramics International,2002,28(7):755-759.
[2] Fan J Y,Lin T T,Hu F X,et al.Effect of sintering temperature on microstructure and mechanical properties of zirconia-toughened alumina machinable dental ceramics[J].Ceramics International,2017,43(4):3647-3653.
[3] Yu T L,Zhao Z,Li J C.Effect of sintering temperature and sintering additives on the properties of alumina ceramics fabricated by binder jetting[J].Ceramics International,2023,49(6):9948-9955.
[4] Kwiatkowski M,Marczyk J,Putyra P,et al.Influence of alumina grade on sintering properties and possible application in binder jetting additive technology[J].Materials,2023,16(10):3853.
[5] Zhao W,Liu W L,Chang J J,et al.Properties comparison of pure Al₂O₃ and doped Al₂O₃ ceramic cores fabricated by binder jetting additive manufacturing[J].Ceramics International,2023,49(24):40336-40346.
[6] Peng L,Jiang W M,Yang L,et al.Effect of silica sol on performance and surface precision of alumina ceramic shell prepared by binder jetting[J].Ceramics International,2022,48(17):24372-24382.
[7] Oropeza D,Hart A J.Reactive binder jet additive manufacturing for microstructural control and dimensional stability of ceramic materials[J].Additive Manufacturing,2021,48:102448.
[8] Gonzalez J A,Mireles J,Lin Y,et al.Characterization of ceramic components fabricated using binder jetting additive manufacturing technology[J].Ceramics International,2016,42(9):10559-10564.
[9] Zocca A,Colombo P,Gomes C M,et al.Additive manufacturing of ceramics:Issues,potentialities,and opportunities[J].Journal of the American Ceramic Society,2015,98(7):1983-2001.
[10] Li Y,Feng Z Y,Hao L,et al.A review on functionally graded materials and structures via additive manufacturing:From multi-scale design to versatile functional properties[J].Advanced Materials Technologies,2020,5(6):1900981.
[11] Chen Z W,Li Z Y,Li J J,et al.3D printing of ceramics:A review[J].Journal of the European Ceramic Society,2019,39(4):661-687.
[12] Zheng T Q,Wang W,Sun J X,et al.Development and evaluation of Al₂O₃-ZrO₂ composite processed by digital light 3D printing[J].Ceramics International,2020,46(7):8682-8688.
[13] Yang K,Li Q L,Chen T C,et al.High-performance 3D-printed Al₂O₃ cores for low-temperature sintering[J].Ceramics International,2023,49(22):36894-36906.
[14] Li H,Liu Y S,Liu Y S,et al.Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum[J].Journal of the European Ceramic Society,2020,40(14):4825-4836.
[15] Zhang L Z,Liu H,Yao H H,et al.Preparation,microstructure,and properties of ZrO₂(3Y)/Al₂O₃ bioceramics for 3D printing of all-ceramic dental implants by vat photopolymerization[J].Chinese Journal of Mechanical Engineering:Additive Manufacturing Frontiers,2022,1(2):100023.
[16] Zhang K Q,He R J,Ding G J,et al.Effects of fine grains and sintering additives on stereolithography additive manufactured Al₂O₃ ceramic[J].Ceramics International,2021,47(2):2303-2310.
[17] 樊军,李乔磊,岳新艳,等.分散剂对光固化3D打印陶瓷浆料分散性影响的研究进展[J].中国材料进展,2025,44(10):914-921.
[18] 李珊,张宇贝,刘兵山,等.面向光固化3D打印陶瓷构件的光敏树脂体系研究[J].硅酸盐通报,2023,42(2):719-727.
[19] Li X,Su H J,Dong D,et al.Selection strategy of curing depth for vat photopolymerization 3D printing of Al₂O₃ ceramics[J].Additive Manufacturing,2024,88:104240.
[20] Wu H D,Liu W,Lin L F,et al.Realization of complex-shaped and high-performance alumina ceramic cutting tools via Vat photopolymerization based 3D printing:A novel surface modification strategy through coupling agents aluminic acid ester and silane coupling agent[J].Journal of the European Ceramic Society,2023,43(3):1051-1063.
[21] Zeng Y,Zhang Z J,Sun L J,et al.Atmosphere debinding heat treatment of 3D printed alumina ceramics[J].Journal of Inorganic Materials,2022,37(3):333.
[22] 李晓溪,贾天卿,冯东海,等.超短脉冲激光照射下氧化铝的烧蚀机理[J].物理学报,2004,53(7):2154-2158.
[23] 吴明宇,弭光宝,李培杰,等.钛铝金属间化合物激光点火燃烧行为及机理[J].材料工程,2024,52(5):1-16.
[24] Du J H.High power Nd-YAG laser welding of SiC particle reinforced aluminium alloy 2124[D].香港:香港理工大学,1997.
[25] Liu S S,Li M,Wu J M,et al.Preparation of high-porosity Al₂O₃ ceramic foams via selective laser sintering of Al₂O₃ poly-hollow microspheres[J].Ceramics International,2020,46(4):4240-4247.
[26] Zou Y,Li C H,Liu J G,et al.Towards fabrication of high-performance Al₂O₃ ceramics by indirect selective laser sintering based on particle packing optimization[J].Ceramics International,2019,45(10):12654-12662.
[27] 魏倩,许自霖,许庆彦,等.烧结温度对氧化铝基陶瓷型壳显微组织及力学行为的影响[J].航空材料学报,2019,39(2):10-15.
[28] Li C H,Hu L,Zou Y,et al.Fabrication of Al₂O₃-SiO₂ ceramics through combined selective laser sintering and SiO₂-Sol infiltration[J].International Journal of Applied Ceramic Technology,2020,17(1):255-263.
[29] Wilkes J,Hagedorn Y C,Meiners W,et al.Additive manufacturing of ZrO₂-Al₂O₃ ceramic components by selective laser melting[J].Rapid Prototyping Journal,2013,19(1):51-57.
[30] Liu H F,Su H J,Shen Z L,et al.Formation mechanism and roles of oxygen vacancies in melt-grown Al₂O₃/GdAlO₃/ZrO₂ eutectic ceramic by laser 3D printing[J].Journal of Advanced Ceramics,2022,11(11):1751-1763.
[31] Yu S Y,Su H J,Jiang H,et al.Surface remelting strategy for enhancing forming quality in laser directed energy deposition of Al₂O₃/GdAlO₃/ZrO₂eutectic ceramics:Defects suppression and microstructure evolution[J].Journal of Advanced Ceramics,2025:9221198.
[32] Yves-Christian H,Jan W,Wilhelm M,et al.Net shaped high performance oxide ceramic parts by selective laser melting[J].Physics Procedia,2010,5:587-594.
[33] Conzelmann N A,Gorjan L,Sarraf F,et al.Manufacturing complex Al₂O₃ ceramic structures using consumer-grade fused deposition modelling printers[J].Rapid Prototyping Journal,2020,26(6):1035-1048.

氧化铝陶瓷3D打印技术研究进展

Research progress on 3D printing technology for alumina ceramics

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张淳, 吴滨. 基于流变优化的氧化铝轻质隔热耐火材料3D打印制备[J]. 耐火材料, 2026, 60(2): 151-155.
[2]	施英统, 郑雯雯, 谢呵瀚, 刘鹏, 刘子玉, 杨现锋. 光固化3D打印制备氧化锆陶瓷的工艺优化[J]. 耐火材料, 2026, 60(1): 25-30.
[3]	张雨生, 黄奥, 邹永顺. 纳米氧化铝及热处理温度对MgO陶瓷过滤器性能的影响[J]. 耐火材料, 2026, 60(1): 31-37.
[4]	李冬梅, 李桂梅, 颜林, 李红超, 李璐, 叶青, 邵长波, 陈志强. 氧化铝微粉多级配比对刚玉浇注料中低温性能的影响[J]. 耐火材料, 2026, 60(1): 74-77.
[5]	欧阳李, 杨爽, 顾华志. 多尺度级配的氧化铝对氧化铝坩埚性能的影响[J]. 耐火材料, 2025, 59(6): 495-499.
[6]	董雨晨, 张三华, 秦红彬, 李鹏鑫, 曹迎楠. 铝硅系耐火浇注料抗铝灰侵蚀性能研究[J]. 耐火材料, 2025, 59(5): 422-426.
[7]	丁贺玮. 氧化铝增韧氧化锆复合材料的性能及应用研究进展[J]. 耐火材料, 2025, 59(5): 450-454.
[8]	刘悦, 丁国强, 刘泽领, 程诗淇, 冯东, 茹红强, 罗旭东, 游杰刚. SiC陶瓷制备技术研究进展[J]. 耐火材料, 2025, 59(4): 361-368.
[9]	孙家朐, 刘新, 丁璇, 吴锋, 罗旭东. 利用铁尾矿制备莫来石材料的研究[J]. 耐火材料, 2025, 59(1): 54-58.
[10]	付杰, 刘源, 赵振威, 孔源, 杨露君, 王安修, 马成良. Y₂O₃-MgO外加量对Isobam凝胶流延氮化硅性能的影响[J]. 耐火材料, 2024, 58(5): 400-404.
[11]	高广泽, 张洪睿, 李建伟, 陈留刚. 活性氧化铝加入量对活性氧化镁结合刚玉-尖晶石浇注料性能的影响[J]. 耐火材料, 2024, 58(5): 419-423.
[12]	任河, 佟天白, 刘梅, 王利娜, 范召东. 氧化铝气凝胶的耐温性能研究[J]. 耐火材料, 2024, 58(4): 297-301.
[13]	邓江, 刘学新, 李文, 张子翼, 员文杰. 氧化铝粒径和氧化锆粉外加量对氧化铝造粒粉性能的影响[J]. 耐火材料, 2024, 58(4): 307-313.
[14]	周玉栋, 李世鹏, 王文武, 张一帆, 赵辰啸. 高导热氮化硅陶瓷的制备研究进展[J]. 耐火材料, 2024, 58(3): 270-276.
[15]	张会, 柴倩, 张红, 王艺兴, 郝晨曦, 王星雨. 氧化锆和氧化镧共掺杂对堇青石多孔陶瓷性能的影响[J]. 耐火材料, 2024, 58(2): 99-103.