碳化硼材料的烧结致密化及其应用研究进展

doi:10.3969/j.issn.1001-1935.2022.05.018

耐火材料 ›› 2022, Vol. 56 ›› Issue (5): 452-457.DOI: 10.3969/j.issn.1001-1935.2022.05.018

碳化硼材料的烧结致密化及其应用研究进展

邹鑫¹⁾, 陈平安¹⁾, 徐广平²⁾, 李享成¹⁾, 朱颖丽¹⁾, 朱伯铨¹⁾

1)武汉科技大学省部共建耐火材料与冶金国家重点实验室湖北武汉 430081
2)江苏中磊节能科技发展有限公司江苏东台 224200

收稿日期:2021-12-08 出版日期:2022-10-15 发布日期:2022-11-07
作者简介:邹鑫:男,1998年生,硕士研究生。E-mail:2406313742@qq.com
基金资助:
湖北省重点研发项目(2020BAA028);湖北省创新群体项目(2020CFA038)。

Sintering densification of boron carbide materials and their application research progress

Zou Xin, Chen Ping’an, Xu Guangping, Li Xiangcheng, Zhu Yingli, Zhu Boquan

The State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081,Hubei,China

Received:2021-12-08 Online:2022-10-15 Published:2022-11-07

摘要/Abstract

摘要： 碳化硼具有优异的高温抗氧化性、高硬度、低密度、高熔点和优异的耐磨性等性能,被广泛应用于耐火材料、耐磨材料和轻质防护材料等领域。综述了近年来碳化硼材料的国内外研究进展和应用情况,分析了无压烧结、热压烧结、热等静压烧结、放电等离子烧结和微波烧结等烧结工艺及烧结助剂(单质、氧化物、碳化物)对碳化硼致密化的影响,并对碳化硼材料的发展进行了展望。

关键词: 碳化硼, 耐火材料, 致密化, 制备方法, 烧结助剂, 研究进展

Abstract: Boron carbide (B₄C) has excellent high-temperature oxidation resistance,high hardness,low density,high melting point and excellent abrasive resistance,which is widely used in fields such as refractories,wear-resistant materials and lightweight protective materials.The research progress and the application of B₄C materials in China and at abroad in recent years were summarized.The influences of sintering processes (pressureless sintering,hot pressing sintering,hot isostatic pressing sintering,spark plasma sintering and microwave sintering) and sintering additives (simple substances,oxides and carbides) on the B₄C densification were analyzed.The development of B₄C materials was prospected.

Key words: boron carbide, refractories, densification, preparation method, sintering additive, research progress

中图分类号:

TQ175

邹鑫, 陈平安, 徐广平, 李享成, 朱颖丽, 朱伯铨. 碳化硼材料的烧结致密化及其应用研究进展[J]. 耐火材料, 2022, 56(5): 452-457.

Zou Xin, Chen Ping’an, Xu Guangping, Li Xiangcheng, Zhu Yingli, Zhu Boquan. Sintering densification of boron carbide materials and their application research progress[J]. Refractories, 2022, 56(5): 452-457.

参考文献

[1] SURI A K,SUBRAMANIAN C,SONBER J K,et al.Synthesis and consolidation of boron carbide:A review[J].International Materials Reviews,2013,55(1):4-40.
[2] 刘坤,高帅波,孟凡兴,等.利用碳化稻壳原位合成SiC-B₄C复合陶瓷粉的研究[J].耐火材料,2020,54(2):107-111.
[3] 李新健,柯昌明,李楠.含碳耐火材料的防氧化方法[J].耐火材料,2006,40(2):133-135+142.
[4] ZHANG W,YAMASHITA S,KITA H.Progress in pressureless sintering of boron carbide ceramics—a review[J].Advances in Applied Ceramics,2019,118(2):1-18.
[5] SUBRAMANIAN C,ROY T K,MURTHY T S R C,et al.Effect of zirconia addition on pressureless sintering of boron carbide[J].Ceramics International,2008,34(6):1543-1549.
[6] 尹邦跃,王零森,方寅初.B₄C超细粉末的制备及烧结[J].无机材料学报,2002(2):343-347.
[7] MASHHADI M,TAHERI-NASSAJ E,SGLAVO V M,et al.Effect of Al addition on pressureless sintering of B₄C[J].Ceramics International,2009,35(2):831-837.
[8] LIU G,CHEN S,ZHAO Y,et al.Effect of Ti and its compounds on the mechanical properties and microstructure of B₄C ceramics fabricated via pressureless sintering[J].Ceramics International,2021,47(10):13756-13761.
[9] LEE H,SPEYER R F.Hardness and fracture toughness of pressureless-sintered boron carbide (B₄C)[J].Journal of the American Ceramic Society,2002,85(5):1291-1293.
[10] ROY T K,SUBRAMANIAN C,SURI A K.Pressureless sintering of boron carbide[J].Ceramics International,2006,32(3):227-233.
[11] LEE C H,CHONG H K.Pressureless sintering and related reaction phenomena of Al₂O₃-doped B₄C[J].Journal of Materials Science,1992,27(23):6335-6340.
[12] ZHU Y,WANG F,WANG Y,et al.Mechanical properties and microstructure evolution of pressureless-sintered B₄C-SiC ceramic composite with CeO₂ additive[J].Ceramics International,2019,45(12):15108-15115.
[13] 刘坤,高帅波,孟凡兴,等.预加SiC粉的碳热还原法制备SiC-B₄C复合陶瓷粉[J].耐火材料,2019,53(5):388-390.
[14] LI X,JIANG D,ZHANG J, et al.Pressureless sintering of boron carbide with Cr₃C₂ as sintering additive[J].Journal of the European Ceramic Society,2014,34(5):1073-1081.
[15] 李可琢,张海军,苑高千,等.聚碳硅烷制备SiC陶瓷研究进展[J].耐火材料,2020,54(3):260-265.
[16] GAO J,WANG D,LEI L,et al.High-pressure sintering of boron carbide-titanium diboride composites and 1ts densification mechanism[J].武汉理工大学学报(材料科学英文版),2020,35(2):356-362.
[17] ZHANG X,GAO H,ZHANG Z,et al.Effects of pressure on densification behaviour,microstructures and mechanical properties of boron carbide ceramics fabricated by hot pressing[J].Ceramics International,2017,43(8):6345-6352.
[18] ZHANG M,ZHANG W K,GAO L Z,et al.Fabrication and microstructure of B₄C matrix composites by hot-pressing sinter[J].Advanced Materials Research,2012,368-373:326-329.
[19] YUE X Y,ZHAO S M,YU L,et al.Microstructures and mechanical properties of B₄C-TiB₂ composite prepared by hot pressure sintering[J].Key Engineering Materials,2010,434:50-53.
[20] 夏淼,司瑶晨,孙红刚,等.MgAlON及其复合材料研究进展[J].耐火材料,2021,55(4):348-353.
[21] CHO N,BAO Z,SPEYER R F.Density- and Hardness-optimized pressureless sintered and post-hot isostatic pressed B₄C[J].Journal of Materials Research,2005,20(8):2110-2116.
[22] LARSSON P,AXEN N,HOGMARK S.Improvements of the microstructure and erosion resistance of boron carbide with additives[J].Journal of materials science,2000,35(14):3433-3440.
[23] 杨道媛,千粉玲,毋娟,等.快速烧结在耐火材料行业的应用前景[J].耐火材料,2008,42(3):226-228.
[24] GHOSH D,SUBHASH G,SUDARSHAN T S,et al.Dynamic indentation response of fine-grained boron carbide[J].Journal of the American Ceramic Society,2007,90(6):1850-1857.
[25] 陈刚,章嵩,王传彬,等.碳化硼陶瓷的放电等离子烧结及其力学性能[J].人工晶体学报,2009,38(1):165-169.
[26] ZHANG X,ZHANG Z,WEN R,et al.Comparisons of the densification,microstructure and mechanical properties of boron carbide sintered by hot pressing and spark plasma sintering[J].Ceramics International,2018,44(2):2615-2619.
[27] 李忠轲,黄紫豪,郑家舜,等.微波烧结法制备碳化硼-石墨化炭黑复合粉体[J].耐火材料,2020,54(1):37-40.
[28] DYATKIN B,GAMACHE R M,ROCK B Y,et al.Microwave-assisted pressureless sintering of silicon-reinforced boron carbide composites[J].Journal of Solid State Chemistry,2020,292(4):121659.
[29] KATZ J D ,BLAKE R D ,PETROVIC J J ,et al.Microwave sintering of boron carbide[J].MRS Online Proceedings Library ,1988,124:219-226.
[30] 王志强,朱伯铨,方斌祥,等.B₄C和Si组合抗氧化剂对低碳MgO-C砖抗氧化性能的影响[J].耐火材料,2008,42(3):161-164.
[31] CAMPOS K S,LENZ E ,NUNES E,et al.The influence of B₄C and MgB₂ additions on the behavior of MgO-C bricks[J].Ceramics International,2012,38(7):5661-5667.
[32] 涂军波,魏军从,李朝云.B₄C外加量对Al₂O₃-SiC-Si₃N₄铁沟浇注料性能的影响[J].耐火材料,2010,44(1):7-10.
[33] 涂军波,魏军从,牛森森.碳化硼加入量对氧化镁-氮化硅铁浇注料力学性能的影响[J].耐火材料,2010,44(3):171-174.
[34] TURATTI A M,PEREIRA A S.Wear resistant boron carbide compacts produced by pressureless sintering[J].Ceramics International,2017,43(11):7970-7977.
[35] KHAJEHZADEH M,EHSANI N,BAHARVANDI H R,et al.Thermodynamical evaluation,microstructural characterization and mechanical properties of B₄C-TiB₂ nanocomposite produced by in-situ reaction of nano-TiO₂[J].Ceramics International,2020,46(17):26970-26984.
[36] ZHANG B,PRIKHNA T,HU C,et al.Graphene-layer-coated boron carbide nanosheets with efficient electromagnetic wave absorption[J].Applied Surface Science,2021,560 :150027.

碳化硼材料的烧结致密化及其应用研究进展

Sintering densification of boron carbide materials and their application research progress

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	姚路炎, 韩兵强, 张锦化, 柯昌明. Ti-Si-Fe合金添加量对Si₃N₄结合SiC材料结构与性能的影响[J]. 耐火材料, 2024, 58(4): 277-283.
[2]	梁效诚, 冯雨, 刘中飞, 罗旭东, 黄敏, 吴锋. 预合成CaZrO₃对镁锆质耐火材料性能的影响[J]. 耐火材料, 2024, 58(3): 213-217.
[3]	刘然, 刘晏廷, 高艳甲, 邓勇. 熔融还原炼铁工艺用耐火材料的研究进展[J]. 耐火材料, 2024, 58(3): 251-256.
[4]	陈天任, 王战民, 秦红彬, 梁成凯, 李旭治. 氢冶金工艺及氢基竖炉用耐火材料研究进展[J]. 耐火材料, 2024, 58(3): 263-269.
[5]	周玉栋, 李世鹏, 王文武, 张一帆, 赵辰啸. 高导热氮化硅陶瓷的制备研究进展[J]. 耐火材料, 2024, 58(3): 270-276.
[6]	张会, 柴倩, 张红, 王艺兴, 郝晨曦, 王星雨. 氧化锆和氧化镧共掺杂对堇青石多孔陶瓷性能的影响[J]. 耐火材料, 2024, 58(2): 99-103.
[7]	慕鑫, 贾毅, 刘春阳, 柴光伟, 余吴明, 杜传明, 马北越. 废旧高铝砖在LF精炼渣中的溶解行为研究[J]. 耐火材料, 2024, 58(1): 25-29.
[8]	徐国涛, 王志强, 秦世民, 刘黎, 张洪雷, 张彦文, 周旺枝. 新一代六铝酸钙质浇注料的研制与应用[J]. 耐火材料, 2024, 58(1): 53-56.
[9]	张巍, 王京阳. 莫来石复合耐火材料的应用进展[J]. 耐火材料, 2024, 58(1): 80-86.
[10]	李斌, 刘杰, 朱波, 郭玉涛, 任博, 封吉圣, 陈俊红. CA₆质耐火材料在水泥回转窑过渡带的应用及损毁机制[J]. 耐火材料, 2023, 57(6): 479-483.
[11]	王明刚, 车连房, 史成龙, 袁宏伟, 刘永振. 钛白粉回转窑用耐火材料的配置及应用[J]. 耐火材料, 2023, 57(6): 504-507.
[12]	丁嘉辉, 张利新, 邓俊杰, 刘萍, 徐恩霞, 李素平. 危废处理焚烧炉内衬用耐火材料研究进展[J]. 耐火材料, 2023, 57(6): 538-541.
[13]	余吴明, 慕鑫, 杜传明, 马北越, 于景坤. 废旧耐火材料用作钢铁冶金熔剂的研究进展[J]. 耐火材料, 2023, 57(6): 542-545.
[14]	李红霞. 先进耐火材料创新助推国家战略实施[J]. 耐火材料, 2023, 57(5): 369-376.
[15]	王战民, 曹喜营, 吴吉光, 秦红彬, 李志刚, 余同暑, 柳军, 刘国齐, 段斌文, 王自强. 钢铁工业用耐火材料新技术进展[J]. 耐火材料, 2023, 57(5): 377-385.