Research status of toughening SiC composite ceramics

doi:10.3969/j.issn.1001-1935.2024.01.018

Abstract

Abstract: SiC ceramics have excellent properties and are widely used in various industries.However,the lack of toughness restricts their application as structural materials.Therefore,improving their toughness has become a research hotspot and focus.The research status of SiC composites toughened by different strengthening phases,such as particle phases,whiskers,fibers and low dimensional nano-materials (carbon nanotubes and graphene),was reviewed,expecting to provide a reference for toughening SiC ceramics in the future.

Key words: silicon carbide, ceramic matrix composites, particle, whisker, low-dimensional nano materials

摘要： SiC陶瓷具有优良的性能,被广泛应用于各领域,但因韧性不足而制约其作为结构材料的应用,故提升其韧性已成为研究热点和焦点。因此,综述了颗粒、晶须、纤维和低维纳米材料(碳纳米管和石墨烯)等不同增强相增韧SiC复合陶瓷的研究现状,期望为今后SiC陶瓷的增韧研究提供参考。

关键词: 碳化硅, 陶瓷基复合材料, 颗粒, 晶须, 低维纳米材料

CLC Number:

TQ174

Wang Wenlong, Chen Gang, Wang Hongjie, Liu Kai. Research status of toughening SiC composite ceramics[J]. Refractories, 2024, 58(1): 87-92.

王雯龙, 陈刚, 王红杰, 刘凯. SiC复合陶瓷增韧研究现状[J]. 耐火材料, 2024, 58(1): 87-92.

References

[1] 刘薇,杨军.装甲防护材料的研究现状及发展趋势[J].热加工工艺,2011,40(2):108-111.
[2] 董博,余超,邓承继,等.反应烧结碳化硅高温性能的研究进展[J].耐火材料,2022,56(1):75-81.
[3] 付振东,赵健,戴叶婧,等.碳化硅陶瓷烧结助剂的作用机制与研究进展[J].材料导报,2021,35(1):1077-1081.
[4] CHEN C Y,WU B H,CHUNG C J,et al.Low-friction characteristics of nanostructured surfaces on silicon carbide for water-lubricated seals[J].Tribology Letters,2013,51(1):127-133.
[5] 王成聃.石墨烯和陶瓷复合材料力学性能的多尺度模拟[D].南京:东南大学,2021.
[6] 秦丽媛.ZrB₂-SiC陶瓷复合材料强度的多尺度分析[D].哈尔滨:哈尔滨工业大学,2019.
[7] 邬国平,谢方民,徐斌.流体密封用碳化硅陶瓷增韧技术研究进展[J].流体机械,2006,34(11):34-39.
[8] 潘文高.SiC-Al₂O₃/AlN-Pr₂O₃相平衡及固溶体研究[D].银川:北方民族大学,2017.
[9] 周元康,何锋.SiC陶瓷密封材料的性能分析[J].贵州工学院学报,1993(4):67-73.
[10] 王毅强,张立同,成来飞,等.纤维表面处理对单向C/SiC复合材料拉伸强度的影响[J].固体火箭技术,2007(6):534-536+540.
[11] KUMAR S,BABLU M,RANJAN A,et al.Fabrication of 2D C/C-SiC composites using PIP based hybrid process and investigation of mechanical properties degradation under cyclic heating[J].Ceramics International,2017,43(3):3414-3423.
[12] 杨博,余金山,顾全超,等.SiC_f/SiC复合材料制备研究进展[J].材料导报,2021,35(3):3050-3056.
[13] 李开元.一维纳米材料增强的碳化物陶瓷基复合材料[D].西安:西北工业大学,2015.
[14] 刘瑞从.低维纳米相增强碳化硅陶瓷复合材料的制备及力学性能研究[D].上海:东华大学,2019.
[15] 蒋梦婷.低维材料增韧碳化硅陶瓷的制备和性能研究[D].湘潭:湘潭大学,2021.
[16] GU Z,YANG Y,LI K,et al.Aligned carbon nanotube-reinforced silicon carbide composites produced by chemical vapor infiltration[J].Carbon,2011,49(7):2475-2482.
[17] 张玲洁.颗粒、晶须强韧化碳化硅陶瓷及在密封环中的应用[D].杭州:浙江大学,2012.
[18] SU B,LIU G,HUANG Z,et al.The effect of in situ synthesized AlN on densification of SiC ceramics by pressureless sintering[J].Ceramics International,2015,41(10):14172-14178.
[19] 周伟,蔡智慧,曾军,等.烧结助剂对SiC液相烧结行为的影响[J].厦门大学学报(自然科学版),2006(4):530-534.
[20]DEHGHANI H,KHODAEI M,YAGHOBIZADEH O,et al.The effect of AlN-Y₂O₃ compound on properties of pressureless sintered SiC ceramics—A review[J].International Journal of Refractory Metals & Hard Materials,2021,95:105420.
[21] 黄楠,韩凌锋,张翠萍,等.原位合成ZrB₂对SiC-ZrB₂陶瓷复合材料组织与性能的影响[J].硅酸盐学报,2021,49(12):2589-2594.
[22] 牛世程,吴吉光,梁鹏鹏,等.BN微粉加入量对Si₃N₄-BN复合材料高温抗氧化性的影响[J].耐火材料,2022,56(6):495-498+504.
[23] AHMOYE D,BUCEVAC D,KRSTIC V D.Mechanical properties of reaction sintered SiC-TiC composite[J].Ceramics International,2018,44(12):14401-14407.
[24] 谭寿洪,陈忠明,江东亮.液相烧结SiC陶瓷[J].硅酸盐学报,1998(2):65-71.
[25] 史秀梅,崔红,曹剑武,等.SiC陶瓷常压烧结致密化过程的研究[J].陶瓷学报,2017,38(1):20-25.
[26] 梁汉琴,姚秀敏,黄政仁,等.液相烧结碳化硅陶瓷的原位研究(英文)[J].无机材料学报,2016,31(4):443-448.
[27] LIANG H,YAO X,ZHANG J,et al.The effect of rare earth oxides on the pressureless liquid phase sintering of α-SiC[J].Journal of the European Ceramic Society,2014,34(12):2865-2874.
[28] LIANG H,YAO X,ZHANG J,et al.Low temperature pressureless sintering of α-SiC with Al₂O₃ and CeO₂ as additives[J].Journal of the European Ceramic Society,2014,34(3):831-835.
[29] BONDIOLI M,SANTOS C,STRECKER K,et al.Oxidation behavior of LPS-SiC ceramics sintered with AlN/Y₂O₃ as additive[J].International Journal of Refractory Metals and Hard Materials,2014,42:246-254.
[30] MULLA M A,KRSTIC V D.Low-temperature pressureless sintering of β-silicon carbide with aluminum oxide and yttrium oxide additions[J].American Ceramic Society Bulletin,1991,70(3):439-443.
[31]EOM J H,SEO Y K,KIM Y W,et al.Mechanical and thermal properties of pressureless sintered silicon carbide ceramics with alumina-yttria-calcia[J].Journal of the American Ceramic Society,2016,99(5):1735-1741.
[32] 张龙.SiC陶瓷的低温烧结及其结构与性能[D].合肥:合肥工业大学,2015.
[33] KIM H M,KIM Y W.Low temperature pressureless sintering of silicon carbide ceramics with alumina-yttria-magnesia-calcia[J].Journal of the Ceramic Society of Japan,2019,127(4):207-214.
[34] 吕学文.碳化硅纳米颗粒增韧碳化硅陶瓷的制备及力学性能研究[D].哈尔滨:哈尔滨工业大学,2021.
[35] 曾凡.反应烧结碳化硅陶瓷的制备及碳化硅纳米线增强研究[D].杭州:浙江理工大学,2018.
[36] WANG Z,LIU Y,ZOU B,et al.Mechanical properties and microstructure of Al₂O₃-SiC_w ceramic tool material toughened by Si₃N₄ particles[J].Ceramics International,2020,46(7):8845-8852.
[37] 李绍纯,戴长虹.碳化硅颗粒、晶须、晶片增韧陶瓷复合材料的研究现状[J].硅酸盐通报,2004(6):63-65.
[38] KIM K J,KIM Y W,LIM K Y,et al.Electrical and thermal properties of SiC-AlN ceramics without sintering additives[J].Journal of the European Ceramic Society,2015,35(10):2715-2721.
[39] 韩凌锋,赵义亮,张翠萍,等.TiC含量对无压液相烧结SiC-TiC陶瓷复合材料结构和性能的影响[J].机械工程材料,2022,46(10):34-38.
[40] BUCEVAC D,BOSKOVIC S,MATOVIC B,et al.Toughening of SiC matrix with in-situ created TiB₂ particles[J].Ceramics International,2010,36(7):2181-2188.
[41] 刘东旭.反应熔渗法碳化硅纳米晶须/纤维增强碳化硅陶瓷基复合材料的制备及性能研究[D].杭州:浙江理工大学,2020.
[42] 王阳阳,贾晨,贾先,等.碳化硅晶须增韧复合材料的研究现状[J].兵器材料科学与工程,2019,42(4):142-146.
[43] BAI Y,SUN M,LI M,et al.Improved fracture toughness of laminated ZrB₂-SiC-MoSi₂ ceramics using SiC whisker[J].Ceramics International,2018,44(8):8890-8897.
[44] LI S,ZHANG Y,HAN J,et al.Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite[J].Ceramics International,2013,39(1):449-455.
[45] SONG N,ZHANG H B,LIU H,et al.Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering[J].Ceramics International,2017,43(9):6786-6790.
[46] LYU Y,TANG H,WANG P.Tribological properties of carbon fiber toughened SiC prepared by hot pressing sintering[J].Ceramics International,2019,45(1):832-838.
[47] 张小亮,黄诗婷,高朋召.SiC-MoSi₂复合材料的制备及其性能的研究进展[J].硅酸盐通报,2013,32(12):2520-2527.
[48] ZHAO S,ZHOU X,YU J,et al.Mechanical properties and in situ crack growth observation of SiC/SiC composites[J].Ceramics International,2014,40(5):7481-7485.
[49] IIJIMA S.Helical microtubules of graphitic carbon[J].Nature,1991,354(6348):56-58.
[50] 熊顺进.碳化硅基陶瓷的放电等离子烧结及强韧化研究[D].广州:广东工业大学,2021.
[51] LANFANT B,LECONTE Y,DEBSKI N,et al.Mechanical,thermal and electrical properties of nanostructured CNTs/SiC composites[J].Ceramics International,2019,45(2):2566-2575.
[52] MEI H,BAI Q,DASSIOS K G,et al.Oxidation resistance of aligned carbon nanotube-reinforced silicon carbide composites[J].Ceramics International,2015,41(9):12495-12498.
[53] FENG W,ZHANG L,LIU Y,et al.Thermal and mechanical properties of SiC/SiC-CNTs composites fabricated by CVI combined with electrophoretic deposition[J].Materials Science and Engineering:A,2015,626:500-504.
[54] NOVOSELOV K S,GEIM A K,MOROZOV S V,et al.Electric field effect in atomically thin carbon films[J].Science,2004,306(5696):666-669.
[55] WALKER L S,MAROTTO V R,RAFIEE M A,et al.Toughening in graphene ceramic composites[J].ACS Nano,2011,5(4):3182-3190.
[56] LI Q,ZHANG Y,GONG H,et al.Effects of graphene on the thermal conductivity of pressureless-sintered SiC ceramics[J].Ceramics International,2015,41(10):13547-13552.
[57] HUANG Y,JIANG D,ZHANG X,et al.Enhancing toughness and strength of SiC ceramics with reduced graphene oxide by HP sintering[J].Journal of the European Ceramic Society,2018,38(13):4329-4337.