钢包透气砖的发展及其典型复合结构的损毁分析

doi:10.3969/j.issn.1001-1935.2022.04.002

耐火材料 ›› 2022, Vol. 56 ›› Issue (4): 283-288.DOI: 10.3969/j.issn.1001-1935.2022.04.002

钢包透气砖的发展及其典型复合结构的损毁分析

陈卢, 许远超, 郭鹏, 张晖, 魏昌晟, 贾庆伟

中钢集团洛阳耐火材料研究院有限公司先进耐火材料国家重点实验室河南洛阳 471039

收稿日期:2021-11-11 出版日期:2022-08-15 发布日期:2022-11-09
作者简介:陈卢:男,1983年生,硕士,高级工程师。E-mail:chenlu2424@126.com

Development of purging plugs for ladles and damaging mechanisms of typical composite structures

Chen Lu, Xu Yuanchao, Guo Peng, Zhang Hui, Wei Changsheng, Jia Qingwei

State Key Laboratory of Advanced Refractories,Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.,Luoyang 471039,Henan,China

Received:2021-11-11 Online:2022-08-15 Published:2022-11-09

摘要/Abstract

摘要： 简要回顾了钢包透气砖材质更替和结构演变历程,列举了单一结构透气砖的性能缺陷。根据主要气道结构类型,将复合结构透气砖划分为弥散型、芯板型和陶瓷管型三大类,分析了各类复合透气砖的结构特征、性能特点和冶金功效。通过剖析服役后下线残砖,揭示了复合透气砖的典型损毁机制:钢液钢渣渗入弥散透气砖后堵塞贯通气孔,渗钢层被高压冲刷或氧枪烧蚀是弥散型复合透气砖的首要损毁机制;钢渣中CaO渗入刚玉-莫来石质芯板的基质中,与莫来石反应生成低熔点相,在氧枪冲蚀下逐渐蚀损,加速了芯板型复合透气砖的损毁;浇注本体的抗热震性差,频繁热冲击时砖体横向断裂,或者直通管渗钢,导致底吹失效或流量减小,是陶瓷管型复合透气砖的主要损毁机制。

关键词: 复合结构透气砖, 结构设计, 冶金功效, 损毁机制

Abstract: The material replacement and the structure evolution of purging plugs for ladles were briefly reviewed,and the deficiencies of single structure plugs were listed.According to the main gas passage types,composited purging plugs were divided into three categories:dispersive,core-plate and ceramic-tube.Their structural characteristics,service performance and metallurgical efficiency were compared.By analyzing the used purging plugs,the typical damage mechanisms of composited purging plugs were revealed.(1)The chief damage mechanism of dispersive composited purging plugs is that liquid steel slag penetrates and blocks the through pores,then the penetration layer is eroded by the high-pressure argon or ablated by the oxygen lance.(2)CaO from steel slag infiltrates the matrix of corundum-mullite core plate,then reacts with mullite to form low melting point phases.The eroded core plate damage is accelerated under oxygen cleaning.(3)Due to the poor thermal shock resistance of the body material,transverse fracture of the plug occurs under frequent thermal shock,or the steel infiltrates the straight tube,resulting in the failure of bottom blowing or the flow reduction,which are the key damage mechanism of ceramic-tube purging plugs.

Key words: purging plugs with composite structures, structural design, metallurgical efficiency, damage mechanism

中图分类号:

TQ175

陈卢, 许远超, 郭鹏, 张晖, 魏昌晟, 贾庆伟. 钢包透气砖的发展及其典型复合结构的损毁分析[J]. 耐火材料, 2022, 56(4): 283-288.

Chen Lu, Xu Yuanchao, Guo Peng, Zhang Hui, Wei Changsheng, Jia Qingwei. Development of purging plugs for ladles and damaging mechanisms of typical composite structures[J]. Refractories, 2022, 56(4): 283-288.

参考文献

[1] 李素梅,周兆保,刘玉敏.弥散型铬刚玉质整体透气砖的应用[J].耐火材料,2000,34(6):362-363.
[2] 陈勇,王锋刚,贺中央.透气砖的发展和应用[C]//2005年全国钢铁工业用优质耐火材料生产与使用经验交流会论文集,武汉,2005:31-37.
[3] 李红霞.现代冶金功能耐火材料[M].北京:冶金工业出版社,2019:532-534.
[4] 张晖,李红霞,杨彬,等.钢包透气砖在精炼条件下的应力场分布研究[J].耐火材料,2009,43(2):113-116.
[5] 陈卢,张晖,禄向阳,等.新型复合结构钢包透气元件的设计与应用[C]//第十一届中国钢铁年会论文集——S14.耐火材料,北京,2017:28-32.
[6] ZHANG J,SUN X G,JIA Q L,et al.Progress and developing trend of purging plugs for refining ladle[J].China's Refractories,2014,23(2):39-42.
[7] 贺中央.材质和结构优化为安全、长寿搭桥——吹氩透气砖的新进展及发展趋势[N].中国冶金报,2008-1-24(4).
[8] 薛正良,王义芳,王立涛,等.用小气泡从钢液中去除夹杂物颗粒[J].金属学报,2003(4):431-434.
[9] 何平,谢计卫.不同透气砖钢包底吹特性的水模研究[J].炼钢,1995(5):45-49.
[10] OUCHI T.Wear and countermeasures of porous plug for ladle[J].Taikabutsu Overseas,2001,21(4): 270-275.
[11] ISHIHARA E.Improvement in wear resistance of porous plug during oxygen lance cleaning operation[C]//Proceedings of UNITECR 2015,Vienna,Austria,2015:1-B1-10.
[12] ISHIHARA E,SAEKI T.Porous plug for ladle refining[J].Shinagawa Technical Report,2011,54:87-96.
[13] 余同暑,张晖,禄向阳.底吹氩透气砖安全报警技术的现状与发展[J].耐火材料,2014,48(4):307-311.
[14] 曹喜营,王刚,郭凯,等.TRIZ创新方法在耐火材料行业中的应用[C]//第十六届全国耐火材料青年学术报告会论文集,营口,2018:521-531.
[15] 张兴华,王宝玉,史朝霞.Al₂O₃-SiO₂-Cr₂O₃-ZrO₂质弥散-狭缝复合式透气砖的设计与应用[C]//2021年全国耐火原料学术交流会论文集,重庆,2021:215-219.
[16] TRUMMER B,FELLNER W,VIERTAUER A.A water modelling comparism of hybrid plug,slot plug and porous plug designs[C]//Proceedings of UNITECR 2015,Vienna,Austria,2015:119-121.
[17] KNEIS L,TRUMMER B,KNAB B.The hybrid plug—an innovative purging plug for steel ladles[J].RHI Bulletin,2004(1):34-38.
[18] 丁钰,刘开琪,王秉军,等.颗粒级配和结合体系对弥散式透气砖性能的影响[J].耐火材料,2013,47(1):39-42.
[19] 郭永谦,张利新,徐刚,等.新型弥散式透气砖的性能及应用[J].耐火材料,2017,51(4):303-304.
[20] 肖同达,刘光明,杨东明,等.弥散式供气砖在300 t钢包中的应用[C]//2021年全国耐火原料学术交流会论文集,重庆,2021:190-195.
[21] 王庆恒.Al₂O₃基弥散型透气材料成孔机理及孔结构与性能研究[D].武汉:武汉科技大学,2018.
[22] 卢家凯,崔庆阳.弥散式和狭缝式透气砖在首钢京唐钢包中的试验对比[J].河南冶金,2017,25(6):10-11+42.
[23] 何渊明,吴凯军.高寿命弥散型透气砖的研制及应用[J].耐火材料,1996,30(1):30-32.
[24] 贾高洋,张仕鸣,贾全利,等.颗粒级配对弥散型刚玉质透气砖材料性能的影响[J].耐火材料,2020,54(1):32-36.
[25] MATSUSHITA T,MUKAI K.Direct observation of molten steel penetration into porous refractories[J].Taikabutsu Overseas,2003(23):15-19.
[26] NIWA S,IWASAWA C,HAYAMI Z U.Control of pore size distribution on porous plug refractories[J].Taikabutsu Overseas,1991(43):241-245.
[27] ZHANAG H,YU T S,YANG W G,et al.Study on ladle purging plug with gradient composite structure and material[C]//Proceedings of UNITECR 2013,Victoria,Canada,2013: 621-625.
[28] 塚本昇,大谷武雄,高桥政久,等.精炼钢包用芯板型透气砖[J].耐火物,1996,48(10):535-536.
[29] 刘景林,译.惰性气体吹炼钢水用的耐火制品及设备[J].国外耐火材料,2001(5):10-15.
[30] 任希儒,译.钢水精炼和脱气用耐火材料[J].国外耐火材料,1994(10):27-31.
[31] TRUMMER B,NILICA R,KNEIS L.New ceramics for innovative purging plugs[C]//Proceedings of UNITECR 2007,Dresden,Germany,2007: 64-67.
[32] 贺中央,周宁生,高振昕.从UNITECR'07论文看世界耐火材料动态(1)钢铁工业用耐火材料[C]//耐火材料发展新动态—问题与对策交流研讨会论文集,洛阳,2008:122-135.

钢包透气砖的发展及其典型复合结构的损毁分析

Development of purging plugs for ladles and damaging mechanisms of typical composite structures

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics

本文评价

[1]	付琪琪, 钟立桦, 白文献, 淦永彤, 邓俊杰. 铜冶炼侧吹炉用镁铬质耐火材料损毁机制[J]. 耐火材料, 2024, 58(2): 148-154.
[2]	李斌, 刘杰, 朱波, 郭玉涛, 任博, 封吉圣, 陈俊红. CA₆质耐火材料在水泥回转窑过渡带的应用及损毁机制[J]. 耐火材料, 2023, 57(6): 479-483.
[3]	晁霞, 李飞, 郭朝阳, 盛国相. 双胎结构狭缝式透气砖的开发及在120 t精炼钢包上的应用[J]. 耐火材料, 2023, 57(1): 78-81.
[4]	韩藏娟, 张美杰. 干熄焦炉斜道区耐火材料及损毁机制研究进展[J]. 耐火材料, 2022, 56(3): 267-271.
[5]	李人骏, 张玲, 李勇, 郭莹莹, 谭上荣. 套筒石灰窑拱桥用方镁石-尖晶石耐火砖的损毁原因分析[J]. 耐火材料, 2021, 55(2): 144-147.
[6]	姚爽, 赵亮, 薛群虎, 徐亮, 李翔. 温度梯度对氧化锆质定径水口损毁的诱导作用[J]. 耐火材料, 2021, 55(1): 26-29.
[7]	赵亮1, 2),薛群虎2) ,张晗3),李翔4),姚爽1). 氧化锆质定径水口晶粒破裂损毁机制研究[J]. , 2020, 54(4): 322-325.
[8]	李百松1,2）,陈文智2）,王畅2）,姚书芳2）. 熔炼Fe-Si-B合金的中频感应炉用石英捣打炉衬的损毁机制[J]. , 2019, 53(2): 91-95.
[9]	舒友亮1）,刘光平2）,方斌祥2）. 刚玉-尖晶石浇注料在电炉钢包中的应用[J]. , 2019, 53(2): 133-136.
[10]	耿可明,孙红刚,谭清华,吕诗宏,闫双志. 钨钼烧结炉用氧化锆制品损毁形式及机制分析[J]. , 2018, 52(3): 165-169.
[11]	刘新红1）,宋煜伟2）,杨金松3）,朱晓燕1）,马腾1）. MoSi2发热元件在不同气氛中使用损毁分析[J]. , 2014, 48(5): 327-330.
[12]	杨林1）严云1,2）胡志华1,2）. 铬盐焙烧旋窑烧成带衬砖损毁机制初探[J]. , 2011, 45(3): 177-0.
[13]	吴文振 . 高效节能H型环球式磨机 [J]. , 2000, 34(4): 242-243.