浸入式水口结瘤机制及优化措施

doi:10.3969/j.issn.1001-1935.2024.05.017

耐火材料 ›› 2024, Vol. 58 ›› Issue (5): 454-460.DOI: 10.3969/j.issn.1001-1935.2024.05.017

• 综合评述 • 上一篇

浸入式水口结瘤机制及优化措施

杜金吉¹⁾, 陈玉娥^1,2), 左小坦²⁾, 赵立²⁾,任博¹⁾, 王恩会¹⁾, 侯新梅¹⁾

1)北京科技大学碳中和研究院北京 100083
2)芜湖新兴铸管有限责任公司安徽芜湖 241002

收稿日期:2024-03-25 出版日期:2024-10-15 发布日期:2024-10-16
作者简介:杜金吉:男,1997年生,本科。E-mail:18406595939@163.com
基金资助:
国家自然科学基金杰出青年基金项目(No.52025041);国家自然科学基金面上项目(52174294)。

Clogging mechanism and optimization measures of submerged entry nozzle

Du Jinji, Chen Yu’e, Zuo Xiaotan, Zhao Li, Ren Bo, Wang Enhui, Hou Xinmei

Beijing Institute of Carbon Neutralization,University of Science and Technology Beijing,Beijing 100083,China

Received:2024-03-25 Online:2024-10-15 Published:2024-10-16

摘要/Abstract

摘要： 在钢铁实际生产过程中,浸入式水口结瘤会对结晶器流场的稳定性产生严重影响。这种现象不仅影响了连铸过程的顺利进行,还可能导致结瘤物剥落,从而降低铸坯质量。阐述了浸入式水口结瘤机制的研究现状,从优化水口结构、优化水口材质、提高钢液洁净度以及施加外部电场共4个方面总结了防止浸入式水口结瘤的措施,并对浸入式水口防结瘤未来的研究方向进行了展望。

关键词: 浸入式水口, 结瘤机制, 夹杂物, 连铸

Abstract: In the actual process of steel production,the submerged entry nozzle clogging seriously affects the stability of the flow field of the mould.This phenomenon not only affects the proceeding of the continuous casting process,but also may cause the nodules to flake off,thus reducing the quality of the casting billets.The research status of the clogging mechanism of the submerged entry nozzle is described.The measures to prevent the clogging of the submerged entry nozzle are summarized from four aspects:optimizing the structure and material of the nozzle,improving the cleanliness of the molten steel and applying the external electric field.The future direction of the anti-clogging of the submerged entry nozzle is prospected.

Key words: submerged entry nozzle, clogging mechanism, inclusions, continuous casting

中图分类号:

TQ175

杜金吉, 陈玉娥, 左小坦, 赵立,任博, 王恩会, 侯新梅. 浸入式水口结瘤机制及优化措施[J]. 耐火材料, 2024, 58(5): 454-460.

Du Jinji, Chen Yu’e, Zuo Xiaotan, Zhao Li, Ren Bo, Wang Enhui, Hou Xinmei. Clogging mechanism and optimization measures of submerged entry nozzle[J]. Refractories, 2024, 58(5): 454-460.

参考文献

[1] 中村利男.边铸用特殊耐火材料:氧化铝-石墨耐火材料[J].吉林冶金,1990(3):6.
[2] 戴卫岗.短流程炼钢工艺用耐火材料[J].耐火材料,1997(6):345-347.
[3] 乔焕山,王保生,王莉,等.铝镇静钢水口结瘤问题研究[J].炼钢,2015,31(1):56-60.
[4] KOJOLA N,EKEROT S,ANDERSSON M, et al.Pilot plant study of nozzle clogging mechanisms during casting of REM treated stainless steels[J].Ironmaking & Steelmaking,2011,38(1):1-11.
[5] 郑宏光,陈伟庆,刘青,等.含钛不锈钢连铸浸入式水口结瘤的研究[J].钢铁研究学报,2005,17(1):14-18.
[6] CALEY W F.On the cause and prevention of tundish nozzle clogging[J].High Temperature Materials & Processes,2006,25(3):157-166.
[7] 赵李平,王勇,王鸿盛.连铸中间包水口堵塞问题的研究现状[J].炼钢,2007,23(2):59-62.
[8] KUMAR S,KESHARI K K,GUPTA A,et al.Improvement in castability of Al killed steel in billet casters by process optimisation.materials science forum[J].Transactions of the Indian Institute of Metals,2020,73:243-249.
[9] ZHANG L F,WANG Y F,ZUO X J.Flow transport and inclusion motion in steel continuous-casting mold under submerged entry nozzle clogging condition[J].Metallurgical and Materials Transactions B,2008,39(4):534-550.
[10] GUTIÉRREZ E,GARCIA-HERNANDEZ S,BARRETO D J,et al.Mathematical modeling of inclusions deposition at the upper tundish nozzle and the submerged entry nozzle[J].Steel Research International,2016,87(11):1406-1416.
[11] 史永振,冯哲,周慎.深冲钢浸入式水口结瘤物分布及成分组成[J].金属功能材料,2022,29(1):95-99.
[12] 王庆祥,吴雄,喻承欢,等.浸入式水口堵塞的机理及其改善措施[J].钢铁,2005(2):34-36.
[13] 季莎,罗艳,张国锋,等.40Cr钢浸入式水口结瘤分层结构的形成机理[J].钢铁,2019,54(8):124-131+201.
[14] 龚坚,王庆祥,周晖.浸入式水口堵塞机制[J].连铸,2001(2):4-7.
[15] BAI H,THOMAS B G.Effects of clogging,argon injection,and continuous casting conditions on flow and air aspiration in submerged entry nozzles[J].Metallurgical and Materials Transactions B,2001,32(4):707-722.
[16] YOKOYA S,TAKAGI S,SOUMA H,et al.Prevention of air suction from the contact-part between sliding gate and immersion nozzle[J].ISIJ International,1998,38(12):1346-1352.
[17] SUZUKI M,YAMAOKA Y,KUBO N,et al.Oxidation of molten steel by the air permeated through a refractory tube[J].ISIJ International,2007,42(3):248-256.
[18] 李文广,孙彦辉,王小松,等.CSP浇注高铝钢水口堵塞研究[J].连铸,2011(S1):44-48.
[19] 姚永宽,王德永,刘承军,等.中间包喂稀土水口结瘤机制的研究[J].稀土,2004(5):17-19.
[20] 袁方明,王新华,张炯明,等.连铸中间包水口堵塞的数值模拟[J].金属学报,2006(10):1109-1114.
[21] ZHANG L F,WANG Y F,ZUO X J.Flow transport and inclusion motion in steel continuous-casting mold under submerged entry nozzle clogging condition[J].Metallurgical and Materials Transactions B,2008,39(4):534-550.
[22] YUAN Q,THOMAS B G,VANKA S P.Study of transient flow and particle transport in continuous steel caster molds:Part Ⅱ.Particle transport[J].Metallurgical and Materials Transactions B,2004,35(4):703-714.
[23] WU S Z,ZHANG J M,LI Z Z.Mathematic model of sen clogging during continuous casting of steel[J].Journal of Iron & Steel Research,2010,17(8):6-9.
[24] LAVERS J D,LASZLO K.Application of electromagnetic forces to reduce tundish nozzle clogging[J].Applied Mathematical Modelling,2004,28(1):29-45.
[25] YANG X,YU J K,HOU X,et al.The charged characteristics of the submerged entry nozzle used for continuous casting[J].Ceramics International,2017,43(2):2881-2883.
[26] YANG X,LIU Z Y,YU J K.Anti-fouling of submerged entry nozzle with electric current pulse[J].Journal of Materials Processing Technology,2017,259:341-345.
[27] PAIK Y H,YOON W J,SHIN H C.Static electrification of solid oxide in liquid metal and electrical double layer at the interface[J].Journal of Colloid and Interface Science,2004,269(2):354-357.
[28] PAIK Y H,PAN J H,YOON W J.Charging phenomena at the metal oxide-liquid metal interfaces and determination of excess electron density of metal oxide-mercury systems by the induced emf method[J].Journal of Colloid and Interface Science,2001,244(2):444-446.
[29] KIM J H,LEE J M ,SHIN H C,et al.Separation of oxide inclusions from liquid metal in an applied electrostatic field[J].Metals and Materials International,2003,9(6):593-597.
[30] 李红霞,顾强,刘国齐,等.浸入式水口氧化铝结瘤堵塞机制[J].硅酸盐学报,2024,52(2):381-389.
[31] BARATI H,WU M,KHARICHA A,et al.A transient model for nozzle clogging[J].Powder Technology,2018,329:181-198.
[32] UEMURA K,TAKAHASHI M,KOYAMA S,et al.Filtration me-chamism of non-metallic inclusions in steel by ceramic loop filter[J].ISIJ International,1992,32(1):150-156.
[33] SASAI K.Direct measurement of agglomeration force exerted between alumina particles in molten steel[J].ISIJ International,2014,54(12):2780-2789.
[34] 段锋,平增福,蒋明学,等.浸入式水口Al₂O₃附着堵塞机理及防止办法[J].耐火材料,2004,38(3):204-207.
[35] 潘秀兰,王艳红,梁慧智,等.连铸机浸入式水口堵塞问题分析及其改善措施[J].世界钢铁,2010,10(3):22-29.
[36] SAMBASIVAM R.Clogging resistant submerged entry nozzle design through mathematical modelling[J].Ironmaking & Steelmaking,2006,33(6):439-453.
[37] 苏志坚,李德伟,丸川雄净,等.电磁旋流水口在钢圆坯连铸中的作用[J].连铸,2011(S1):183-188.
[38] INOUE S ,OGATA M ,NOMURA O,et al.Water model simulation of “mogul-lined” submerged entry nozzle[J].Taikabutsu Overseas,2004(3):24.
[39] 刘国齐,李红霞,袁磊,等.连铸用浸入式水口防结瘤研究进展[J].耐火材料,2021,55(6):533-538.
[40] BAI H B,THOMAS G.Effects of clogging,argon injection,and continuous casting conditions on flow and air aspiration in submerged entry nozzles[J].Metallurgical and Materials Transactions B,2001,32:707-722.
[41] KUMAR D S,RAJENDRA T,SARKAR A,et al.Slab quality improvement by controlling mould fluid flow[J].Ironmaking & steelmaking:Processes,Products and Applications,2007,34(2)185-191.
[42] 王振兰,李小明.连铸用功能耐火材料的发展[J].山东冶金,2008(1):8-11.
[43] 杨明磊,程常桂,李阳,等.连铸中间包水口堵塞机理及控制技术的发展[J].钢铁研究学报,2017,29(10):773-780.
[44] 王恩会,杨亚锟,侯新梅.非氧化物陶瓷氧化动力学的研究现状与进展[J].工程科学学报,2022,44 (4):654-663.
[45] MIYAGAWA N,ANDO M,TAKAHASHI S.Application of β-Al₂O₃ containing immersion nozzle for continuous casting of stainless steel[J].Taikabutsu Overseas,1996,16(3):16-23.
[46] 贺中央.连铸用功能耐火材料的现状及发展趋势[J].耐火材料,2011,45(6):462-465+474.
[47] 梅雪辉,温铁光,张越,等.钙处理技术在鞍钢ASP生产线的应用[J].鞍钢技术,2013(1):55-58.
[48] 戴文斌,杨鑫,周秀丽,等.利用脉冲电流控制水口堵塞的研究[J].辽宁科技大学学报,2016,39(1):12-14+30.
[49] KENZO A,HIDO M,KAZUYUKI T,et al.Low superheat teeming with electromagnetic stirring[J].ISIJ International,1995,35(6):680-685.
[50] 李德伟,苏志坚,陈进,等.钢圆坯连铸过程中渐开式电磁旋流水口数值模拟[J].金属学报,2013,49(7):871-880.

浸入式水口结瘤机制及优化措施

Clogging mechanism and optimization measures of submerged entry nozzle

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	田晨, 职建军, 甘菲芳, 范正洁, 高华, 袁磊, 刘国齐, 于景坤, 李红霞. ZrO₂-C质浸入式水口渣线耐火材料的侵蚀机制分析[J]. 耐火材料, 2023, 57(2): 113-116.
[2]	李延, 袁磊, 田晨, 刘国齐, 于景坤, 李红霞. 脉冲电场对浸入式水口渣线耐火材料侵蚀的影响[J]. 耐火材料, 2022, 56(5): 374-379.
[3]	沈明科, 罗明, 胡承洋, 喻燕, 宋雅楠, 倪飞江, 李金. 四种不同氧化铝微粉对Al₂O₃-C材料性能的影响[J]. 耐火材料, 2021, 55(6): 498-501.
[4]	曹磊, 石永亮, 马保振, 黄伟青, 韩立浩. TRIZ理论在改善引流砂对钢液危害中的应用[J]. 耐火材料, 2021, 55(6): 517-521.
[5]	杨全海, 王重君, 白晓卫, 杨晓乐, 丁宁, 罗诚. 长寿命板坯中间包的生产实践[J]. 耐火材料, 2021, 55(6): 522-524.
[6]	刘国齐, 李红霞, 袁磊, 杨文刚, 钱凡, 马渭奎, 于建宾, 顾强, 于景坤. 连铸用浸入式水口防结瘤研究进展[J]. 耐火材料, 2021, 55(6): 533-538.
[7]	孙亚东, 杜传明, 袁磊, 于景坤. 利用外加电流抑制浸入式水口堵塞的研究进展[J]. 耐火材料, 2021, 55(4): 364-368.
[8]	徐国涛1),刘孟1),吴杰1),张彦文2) ,张洪雷1). 连铸中间包涂料组成及性能对钢水增氢的影响分析[J]. , 2020, 54(4): 361-364.
[9]	魏昌晟1,2), 雷贤卿1), 曹喜营2）, 闫广周2). TRIZ创新方法在浸入式水口成型工艺改进中的应用[J]. , 2020, 54(2): 152-155.
[10]	唐冰杰1),王梓祎1),李金雨1, 2),连伟康1, 2),涂军波1),魏军从1),刘永辉1). PVP结合镁质中间包干式料的研制[J]. , 2019, 53(3): 211-213.
[11]	郁书中1),彭学峰1),崔任渠1),刘正龙2),邓承继2). 含不烧镁橄榄石的镁质中间包涂料对汽车板钢洁净度的影响[J]. , 2019, 53(2): 101-105.
[12]	闫广周,钱凡,杨文刚,刘国齐. 不同添加剂对镁碳质水口材料性能的影响[J]. , 2018, 52(2): 135-139.
[13]	杨时标1）,金从进2）. 连铸功能耐火材料制造的造粒工艺[J]. , 2017, 51(4): 317-320.
[14]	魏昌晟1,2)刘国齐2)闫广周2)王建国2). 连铸“三大件”冷等静压成型工艺仿真[J]. , 2017, 51(1): 44-46.
[15]	孟红涛,王允,郝明选. 机压弥散型中间包镁质气幕挡墙的研制及应用[J]. , 2016, 50(1): 67-68.