Ti3SiC2基复合材料的研究进展

doi:10.3969/j.issn.1001-1935.2024.04.017

耐火材料 ›› 2024, Vol. 58 ›› Issue (4): 362-368.DOI: 10.3969/j.issn.1001-1935.2024.04.017

• 综合评述 • 上一篇

Ti₃SiC₂基复合材料的研究进展

贾换^1,2), 冯需¹⁾, 袁蝴蝶²⁾

1)西安思源学院陕西西安 710038
2)西安建筑科技大学材料科学与工程学院陕西西安 710055

收稿日期:2024-01-11 出版日期:2024-08-15 发布日期:2024-08-21
通讯作者: 冯需,女,1982年生,硕士,副教授。E-mail:48464123@qq.com
作者简介:贾换:女,1986年生,硕士。E-mail:515923126@qq.com
基金资助:
陕西教育厅专项科研基金(21JK0853)。

Research progress of Ti₃SiC₂ matrix composites

Jia Huan, Feng Xu, Yuan Hudie

First author's address: Xi'an Siyuan University,Xi'an 710038,Shaanxi,China

Received:2024-01-11 Online:2024-08-15 Published:2024-08-21

摘要/Abstract

摘要： Ti₃SiC₂作为一种新型金属陶瓷材料,集金属和陶瓷特性于一身,如具有高热导率、高熔点、高屈服强度、良好的热稳定性、高弹性模量、优异的抗热震性等。但纯Ti₃SiC₂材料在高于1 100 ℃时抗氧化性较差,同时由于高温塑性变形导致其在高温下的强度降低,其使用范围受到限制。目前,一般通过引入增强相来制备综合性能优异的Ti₃SiC₂基复合材料。重点综述了近年来Ti₃SiC₂基复合材料的研究现状,分析了常见的几种Ti₃SiC₂基复合材料的制备方法、增强相及复合材料的各项性能,并提出了进一步的发展方向。

关键词: Ti₃SiC₂, 增强相, 放电等离子烧结, 热压烧结, 力学性能

Abstract: As a new cermet material,Ti₃SiC₂ combines the properties of metals and ceramics,such as high thermal conductivity,high melting points,high yield strength,good thermal stability,high elastic modulus,and excellent thermal shock resistance.However,the pure Ti₃SiC₂ material has poor oxidation resistance at above 1 100 ℃,and its strength at high temperatures is reduced due to plastic deformation,which limits its application.At present,Ti₃SiC₂ matrix composites with excellent comprehensive properties are generally prepared by introducing reinforcements.The research status of Ti₃SiC₂ matrix composites in recent years was reviewed.The preparation methods,reinforcements and properties of several common Ti₃SiC₂ matrix composites were analyzed.The further development direction was put forward.

Key words: Ti₃SiC₂, reinforcements, discharge plasma sintering, hot pressing sintering, mechanical pro-perties

中图分类号:

TB34

贾换, 冯需, 袁蝴蝶. Ti₃SiC₂基复合材料的研究进展[J]. 耐火材料, 2024, 58(4): 362-368.

Jia Huan, Feng Xu, Yuan Hudie. Research progress of Ti₃SiC₂ matrix composites[J]. Refractories, 2024, 58(4): 362-368.

参考文献

[1] 汪阳,刘秀波,欧阳春生,等.三元层状固体润滑Ti₃SiC₂复合材料的制备与摩擦学研究进展[J].表面技术,2020,49(1):142-153.
[2] 田养利,尹洪峰,陈金学.Ti₃SiC₂复合材料的研究进展[J].材料导报,2014,28(S1):104-106.
[3] BARSOUM M W,EL-RAGHY T.Ternary carbide of titanium and silicon[J].Advanced Materials & Processes,1997,152(1):51.
[4] BUITKENOV D B,RAKHADILOV B K,SAGDOLDINA Z B,et al.Reserach of the mechanic-tribological characteristics of Ti₃SiC₂/TiC coatings after annealing[J].Eurasian Journal of Physics and Functional Materials,2020,4(1):86-92.
[5] 肖琪聃,周峰,吴珊.无压熔渗制备TiC/Ti₃SiC₂复合材料高速载流摩擦磨损性能[J].复合材料学报,2018,35(10):2832-2840.
[6] 周峰,肖琪聃,吴珊.Ti₃SiC₂/TiC复合材料的制备及力学性能研究[J].科学技术与工程,2017,25(17):274-278.
[7] 贾换,尹洪峰,袁蝴蝶,等.TiC/Ti₃SiC₂复合材料的制备及其性能研究[J].兵器材料科学与工程,2012,35(6):45-48.
[8] CAI Y Z,YIN X W,YIN H F.Effects of SiC amount on phase compositions and properties of Ti₃SiC₂-based composites[J].Journal of Central South University,2015,22(1):14-22.
[9] TIAN Y L,YIN H F,CHEN J X,et al.Effect of addition on oxidation resistance of Ti₃SiC₂ matrix composites[J].Key Engineering Materials,2017,4402(727):558-564.
[10] 贾换,尹洪峰,袁蝴蝶.SiC对热压制备SiC/Ti₃SiC₂复合材料的影响[J].兵器材料科学与工程,2017,40(4):96-100.
[11] 陈金学,尹洪峰,田养利,等.引入MgAl₂O₄对Ti₃SiC₂基复合材料性能的影响[J].复合材料学报,2015,32(4):1053-1060.
[12] 田养利,尹洪峰,陈金学,等.陶瓷添加物对Ti₃SiC₂基复合材料抗氧化性的影响[J].复合材料学报,2016,33(2):350-357.
[13] 陈盼军,尹洪峰,潘丽青,等.热压制备Ti₃SiC₂/MgAl₂O₄复合材料及其性能研究[J].兵器材料科学与工程,2011,34(5):53-56.
[14] 杜正坤,任书芳,王静波,等.Ti₃SiC₂-Al₂O₃复合材料在不同液体介质中的摩擦磨损性能[J].摩擦学学报,2010,30(3):223-228.
[15] JI J,ZHANG Z Y,ZHANG L,et al.Grains refinement mechanism of (Ti,Ta)₃SiC₂/Al₂O₃ composite ceramics[J].Ceramics International,2022,48(18):26689-26695.
[16] WANG X,QI F,WANG Z,et al.Dependence of Al doping on the in-situ reactive preparation and mechanical properties of Ti₃SiC₂/Al₂O₃ composites[J].ES Materials & Manufacturing,2021(15):85-95.
[17] 尹洪峰,杨祎诺.TaC/Ti₃SiC₂复合材料的制备与性能[J].复合材料学报,2014,31(5):1258-1263.
[18] 杨祎诺,尹洪峰,刘百宽,等.加入TaC对Ti₃SiC₂陶瓷材料性能的影响[J].航空材料学报,2013,33(1):56-60.
[19] YANG J,GU W,PAN L M,et al.Friction and wear properties of in situ (TiB₂+TiC)/Ti₃SiC₂composites[J].2011,271(11/12):2940-2946.
[20] ZOU W J,ZHANG H B,YANG J,et al.Mechanical,thermal physical properties and thermal shock resistance of in situ (TiB₂+SiC)/Ti₃SiC₂ composite[J].Journal of Alloys and Compounds,2018(741):44-50.
[21] ZOU W J,LI F Z,ZHANG H B,et al.Microstructure and mechanical properties of in-situ hot pressed (TiB₂+SiC)/Ti₃SiC₂ composites with tunable TiB₂ content[J].Advances in Applied Ceramics,2016,115(5):282-287.
[22] ZAN Q F,DONG L M,WANG C,et al.Improvement of mechanical properties of Al₂O₃/Ti₃SiC₂ multilayer ceramics by adding SiC whiskers into Al₂O₃ layers[J].Ceramics International,2007,33(3):385-388.
[23] ZHOU X B,JING L,YONG D K,et al.Fabrication of SiC_w/Ti₃SiC₂ composites with improved thermal conductivity and mechanical properties using spark plasma sintering[J].Journal of Advanced Ceramics,2020,9(4):462-470.
[24] ZHANG J F,WU T,WANG L J,et al.Microstructure and properties of Ti₃SiC₂/SiC nanocomposites fabricated by spark plasma sintering[J].Composites Science and Technology,2008,68(2):499-505.
[25] ISLAK B Y,AYAS E.Evaluation of properties of spark plasma sintered Ti₃SiC₂ and Ti₃SiC₂/SiC composites[J].Ceramics International,2019,45(9):12297-12306.
[26] CHAHHOU B ,ROGER J.Reactive sintering and thermodynamics of Ti₃SiC₂/SiC composites[J].Ceramics International,2022,48(23):34635-34649.
[27] 陈金学,尹洪峰,帅航,等.添加Al₂O₃对Ti₃SiC₂复合材料性能的影响[J].中国有色金属学报,2015,25(4):997-1004.
[28] 潘丽青,尹洪峰,陈盼军,等.Al₂O₃含量对Ti₃SiC₂/Al₂O₃复合材料抗氧化性能的影响[J].兵器材料科学与工程,2011,34(5):70-74.
[29] MAJDI H S,ABDTAWFEEQ T H,HASAN W M G,et al.Synthesis and characterization of the in-situ Ti₃SiC₂/Al₂O₃composite by SPS of mechanically activated powders of TiO₂,Al,C,and Si[J].Silicon,2023,15(6):2931-2940.
[30] ZHANG R,CHEN B,LIU F,et al.Microstructure and mechanical properties of composites obtained by spark plasma sintering of Ti₃SiC₂-15vol% Cu mixtures[J].Materials,2022,15(7):2515.
[31] YI Y Y,NGAI T,WANG A,et al.High temperature interfacial phase stability of a Mo/Ti₃SiC₂ laminated composite[J].Ceramics International,2016,42(9):10951-10956.
[32] POURALI Z,SOVIZI M R,YAFTIAN M R,et al.Microstructures and mechanical behavior of Ti₃SiC₂/Al₂O₃-Ni Composites synthesized by pulse discharge sintering[J].Journal of Materials Engineering and Performance,2018(27):3600-3609.
[33] 朱界,张方舟,谢有菊,等.MAX相Ti₃SiC₂高导电涂层的研究进展[J].材料导报,2021,35(23):23025-23032+23039.
[34] 李建华,张超,王晓辉.三元层状可加工导电MAX相陶瓷研究进展[J].现代技术陶瓷,2017,38(1):3-20.

Ti₃SiC₂基复合材料的研究进展

Research progress of Ti₃SiC₂ matrix composites

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李文凤, 申天姿, 郭会师, 曹金金, 康晓旭, 石凯, 康晓阳. 多羟基糖类结合剂对Al₂O₃-SiC-C质无水炮泥性能的影响[J]. 耐火材料, 2024, 58(4): 314-318.
[2]	邓承继, 贺锋, 梁一鸣, 李季, 高超, 慕孟. TiO₂添加量对SiC多孔陶瓷物相组成及性能的影响[J]. 耐火材料, 2024, 58(2): 93-98.
[3]	闵昌胜, 董博, 余超, 邓承继, 邢广超, 丁军, 刘浩, 祝洪喜. 颗粒级配对重结晶SiC蜂窝陶瓷显微结构与力学性能的影响[J]. 耐火材料, 2024, 58(2): 127-131.
[4]	王永新, 高亚博, 方要华, 李亚格, 黄仲, 张海军. 耐火浇注料用SiO₂、Al₂O₃和MgO微粉结合剂研究进展[J]. 耐火材料, 2024, 58(2): 167-173.
[5]	夏玉婷, 杨文博, 饶羽彤, 聂锐杉, 姚远. 轻质高强莫来石浇注料的组分优化和性能增强[J]. 耐火材料, 2024, 58(1): 72-75.
[6]	姚万凯, 方斌祥, 李享成, 陈平安, 朱颖丽, 朱伯铨. 碳化硼复合陶瓷增强增韧研究进展[J]. 耐火材料, 2023, 57(6): 531-537.
[7]	余超, 杨昕雨, 陈博, 邓承继, 吕治江, 董博陈嵛沣, 丁军, 祝洪喜. 石灰岩尾矿制备多孔陶瓷及其性能研究[J]. 耐火材料, 2023, 57(4): 281-285.
[8]	邝昌柳, 王杏, 刘正龙, 丁军, 余超, 邓承继, 祝洪喜. ZrC改性石墨对低碳Al₂O₃-C耐火材料结构与性能的影响[J]. 耐火材料, 2023, 57(4): 295-299.
[9]	邹鑫, 肖学平, 宋雅楠, 陈平安, 朱颖丽, 李享成. B₄C添加量对Al₂O₃-C材料性能的影响[J]. 耐火材料, 2023, 57(4): 310-313.
[10]	董博, 邓承继, 陈嵛沣, 谢哲, 丁军, 朱青友, 祝洪喜, 余超. 不同量粉煤灰漂珠制备氧化物多孔陶瓷的性能研究[J]. 耐火材料, 2023, 57(3): 185-188.
[11]	邹起良, 邓承继, 董博, 丁军, 朱万政, 王周福, 祝洪喜, 王琳, 余超. 原位生成陶瓷相结合Ti(C,N)复合材料及其性能研究[J]. 耐火材料, 2023, 57(2): 93-98.
[12]	刘涛, 马北越, 昝文宇. 稀土盐类热障/环境障涂层研究现状[J]. 耐火材料, 2023, 57(2): 175-179.
[13]	陈洋, 邓承继, 丁军, 余超, 娄晓明. 硝酸铁负载方式对氮化制备Si₃N₄复合MgO-C材料的影响[J]. 耐火材料, 2022, 56(6): 477-480.
[14]	尹玉成, 朱青友, 周双清, 夏忠锋, 李亦韦, 刘志强. 耐火材料高温力学性能综合测定仪的研制及实验教学应用[J]. 耐火材料, 2022, 56(4): 364-368.
[15]	蔡伏玲, 韩兵强, 陈俊峰, 苗正, 王义龙. 添加Ti₃AlC₂对MgO-C材料性能的影响[J]. 耐火材料, 2022, 56(3): 193-196.