原料预处理对制备TiB2粉体的影响

doi:10.3969/j.issn.1001-1935.2025.06.009

耐火材料 ›› 2025, Vol. 59 ›› Issue (6): 506-510.DOI: 10.3969/j.issn.1001-1935.2025.06.009

原料预处理对制备TiB₂粉体的影响

王兴国, 徐晨, 长世伦, 张照磊, 李欣, 陈滨

江苏大学材料科学与工程学院江苏镇江 212013

收稿日期:2025-01-05 出版日期:2025-12-15 发布日期:2025-12-23
通讯作者: 李欣,女,1991 年生,博士,助理研究员。E-mail:1000005148@ujs.edu.cn
作者简介:王兴国:男,1999年生,硕士研究生。E-mail:508975690@qq.com
基金资助:
江苏省自然科学青年基金资助项目(BK20200898)。

Influence of raw material pretreatment on preparation of TiB₂ powder

Wang Xingguo, Xu Chen, Chang Shilun, Zhang Zhaolei, Li Xin, Chen Bin

First author’s address:School of Materials Science & Engineering,Jiangsu University,Zhenjiang 212013,Jiangsu,China

Received:2025-01-05 Online:2025-12-15 Published:2025-12-23

摘要/Abstract

摘要： 为探究原料预处理对制备TiB₂粉体的作用规律,以TiO₂、B₄C和炭黑作为反应原料,通过微波辅助硼热/碳热还原法在1 450 ℃保温20 min下制备TiB₂粉体,探讨三种不同的原料预处理方式(原料未经预处理、原料球磨和原料球磨-压制球团)对产物的物相组成和微观形貌的影响。结果表明:原料球磨6 h处理后,在1 450 ℃保温20 min下制备出的TiB₂粉体具有理想的六方片状结构,平均粒径约为0.52 μm,且残留C、O含量(w)分别为0.254%和 0.556%,产物中无其他杂相;原料未经预处理时,反应产物中有TiC残留,原因是原料间的粒径差距大,扩散速率缓慢,致使反应不完全;原料经球磨-压制球团处理后,反应产物中有TiBO₃、Ti₂O₃残留,主要是由于致密的球团抑制反应过程中CO逸出,进而抑制反应的正向进行,导致产物中有未反应物质残留。最后,结合产物的物相和形貌变化,推测未反应物质TiC和TiBO₃均由TiO₂和B₄C反应生成。

关键词: TiB₂, 硼热/碳热还原法, 预处理, 球磨, 球团

Abstract: To explore the effect of raw material pretreatment on their preparation,TiB₂ powders were prepared with TiO₂,B₄C and carbon black as starting materials by the microwave-assisted boron/carbon thermal reduction method,firing at 1 450 ℃ for 20 min.The effects of three raw material pretreatment methods (no pretreatment,ball milling,and ball milling-pressing pellets) on the phase composition and microscopic morphology of the powders were investigated.The results show that after ball milling raw materials for 6 h and firing at 1 450 ℃ for 20 min,the TiB₂ powder obtained has an ideal hexagonal sheet-like structure with an average particle size about 0.52 μm as well as residual C and O contents of 0.254 mass% and 0.556 mass%.No other impurity phases are detected in the product.When using the unpretreated raw materials,there is residual TiC in the reaction products,mainly because the large particle size difference between the raw materials and slow diffusion rate lead to incomplete reaction.After pretreating the raw materials by ball milling-pressing pellets,there are TiBO₃ and Ti₂O₃ residues in the reaction products,mainly because the dense pellets inhibit the CO escape during the reaction,and then the forward progress of the reaction.Combined with the changes in the phase and morphology of the products,it is inferred that the unreacted TiC and TiBO₃ are formed by the reaction of TiO₂ and B₄C.

Key words: TiB₂, boron thermal/carbon thermal reduction method, pretreatment, ball milling, pellet

中图分类号:

TQ175

王兴国, 徐晨, 长世伦, 张照磊, 李欣, 陈滨. 原料预处理对制备TiB₂粉体的影响[J]. 耐火材料, 2025, 59(6): 506-510.

Wang Xingguo, Xu Chen, Chang Shilun, Zhang Zhaolei, Li Xin, Chen Bin. Influence of raw material pretreatment on preparation of TiB₂ powder[J]. Refractories, 2025, 59(6): 506-510.

参考文献

[1] 王兴国,陈滨,李欣,等.以蔗糖为碳源制备亚微米级TiB₂粉体的研究[J].耐火材料,2024,58(5):405-409.
[2] WANG X G,LI X,CHEN B,et al.Thermodynamic research of the reaction mechanism for TiB₂ synthesized by carbothermal reduction[J].Journal of the Australian Ceramic Society,2024,60(5):1669-1678.
[3] YU J C,MA L,ABBAS A,et al.Carbothermal reduction synthesis of TiB₂ ultrafine powders[J].Ceramics International,2016,42(3):3916-3920.
[4] LI X,CHEN B,QIAO J,et al.Low-temperature synthesis and sinterability of high-purity submicron TiB₂ powder via microwave-assisted carbothermal reduction[J].Journal of the European Ceramic Society,2024,44(7):4549-4557.
[5] LI X,CHEN B,TANG J,et al.Growth mechanism of bimodal-sized TiB₂ particles synthesis via a NaCl additive-microwave-assisted carbothermal reduction[J].Journal of Alloys and Compounds,2024,994:174653.
[6] LI X,WANG X G,TANG J,et al.Low-temperature synthesis of high-purity TiB₂ via carbothermal reduction of metatitanic acid and H₃BO₃[J].Ceramics International,2023,49(24):40140-40148.
[7] 陈滨,王兴国,李欣,等.TiO₂晶型对微波加热制备TiB₂粉体的影响[J].耐火材料,2024,58(1):44-47+52.
[8] 虞洋,赵雨杰,刘荣勇,等.成果展示二陶瓷原料预处理工艺技术与装备研究[J].装备制造技术,2023(5):7-10.
[9] 郭启纯.石油系针状焦生产原料的预处理工艺研究[J].化工管理,2023(17):123-125.
[10] 孙丹丹,张家良,武燕庆,等.原料预处理对BaTiO₃压电陶瓷的物性影响[J].无机材料学报,2017,32(6):615-620.
[11] 龚泽洲,张贺贺,徐荣琪,等.原料预处理对SiC多孔陶瓷性能的影响[J].建材世界,2022,43(3):1-5.
[12] 舒成,李克健,章序文,等.原料预处理对氢氧化钾活化法制备活性炭的影响[J].炭素技术,2014,33(2):5-8.
[13] 李欣,邢鹏飞,高帅波,等.原料预处理对电热法制备碳化硼的影响 [J].铁合金,2017,48(1):21-26.

[1]	阮国智, 张智慧, 张兰芹. 石墨烯滑板涂料的制备及性能研究[J]. 耐火材料, 2025, 59(4): 337-339.
[2]	彭杰, 刘江昊, 张海军. 硼热/碳热还原法制备过渡金属二硼化物研究进展[J]. 耐火材料, 2025, 59(2): 170-176.
[3]	李铁军, 邓军平, 廉晓庆, 曹会彦, 王龙庆, 华小虎, 邓丽荣. TiB₂添加量对Si₃N₄-SiC耐火材料性能的影响[J]. 耐火材料, 2024, 58(6): 486-490.
[4]	王兴国, 陈滨, 李欣, 长世伦, 徐晨, 杨建红. 以蔗糖为碳源制备亚微米级TiB₂粉体的研究[J]. 耐火材料, 2024, 58(5): 405-409.
[5]	陈滨, 王兴国, 李欣, 吴纪清, 唐健, 杨建红. TiO₂晶型对微波加热制备TiB₂粉体的影响[J]. 耐火材料, 2024, 58(1): 44-47.
[6]	黄章恒, 赵靖, 黄冠腾, 郑朝洲, 罗姗姗, 欧景娟, 李杏燕. 球料质量比和大小研磨球质量比对Cr₂O₃粉体球磨效果的影响[J]. 耐火材料, 2022, 56(2): 162-165.
[7]	刘晨晖, 张宇翠, 贾全利, 叶方保, 钟香崇. β-SiAlON含量对SiAlON结合刚玉材料性能的影响[J]. 耐火材料, 2021, 55(5): 452-455.
[8]	董骏峰, 王洪红, 李孝建, 张海军. BN纳米管制备研究进展[J]. 耐火材料, 2021, 55(4): 338-347.
[9]	司超伟,郎杰夫,游杰刚,姚焯. 研磨时间对熔盐法合成铁铝尖晶石粉体的影响[J]. , 2020, 54(3): 219-222.
[10]	张晶,李红霞,刘国齐. 催化剂和熔盐对硅粉氮化反应合成Si3N4的影响[J]. , 2019, 53(1): 6-10.
[11]	朱玲玲,刘洛强,张星,李红霞,丁达飞,叶国田. 高能球磨预处理工业氧化铝对制备亚微米α-Al2O3形貌的影响[J]. , 2018, 52(6): 401-405.
[12]	吴彤1) ,叶建东2). 超分散剂在制备α- Al2O3悬浮浆料中的应用研究[J]. , 2018, 52(4): 292-295.
[13]	甘学贤1）,田野2),宋秀梅1）,刘娜3）,代洪友3）. 研磨设备和工艺参数对氧化锆粉体粒度的影响[J]. , 2018, 52(3): 205-208.
[14]	王滨1) 黄锋2) 杨政宏2) 姜爱君2). Al2O3-SiC-C砖的研制及应用[J]. , 2013, 47(6): 451-454.
[15]	陈留刚，叶国田，翟鹏涛，朱玲玲，张宇翠，傅安平. 机械活化含不同镁源混合物合成堇青石[J]. , 2013, 47(1): 14-18.

原料预处理对制备TiB₂粉体的影响

Influence of raw material pretreatment on preparation of TiB₂ powder

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价