Research progress on preparation of silicon nitride by catalytic nitridation

doi:10.3969/j.issn.1001-1935.2023.03.017

Abstract

Abstract: Silicon nitride is widely used in refractories,metallurgy,aerospace and other fields due to its excellent properties,such as high strength and good resistance to high-temperature,corrosion,wear,thermal shock and oxidation.The introduction of catalyst into the nitriding process of silicon powder by the catalytic nitriding method can not only realize the rapid nitriding of silicon powder at low temperatures,but also change the morphology of the products,promote the formation of silicon nitride whiskers,improve the microstructure of the products,and enhance the mechanical properties.The research progress on the preparation of silicon nitride by catalytic nitriding with metals and metallic oxides as catalysts was reviewed,and the future development direction was prospected.

Key words: silicon nitride, catalytic nitriding, metal, metallic oxide, catalytic mechanism

摘要： 氮化硅具有高强度、耐高温、耐腐蚀耐磨损、抗热震、抗氧化等优良性能,被广泛应用于耐火材料、冶金及航天等领域。催化氮化法是在硅粉氮化过程中引入催化剂,不仅能够实现硅粉的低温快速氮化,而且能够改变产物的形貌,促进氮化硅晶须的生成,进而改善制品的显微结构,提高其力学性能。为此,综述了金属单质和金属氧化物作为催化剂催化氮化制备氮化硅的研究进展,并展望了催化氮化制备氮化硅工艺今后的发展方向。

关键词: 氮化硅, 催化氮化, 金属单质, 金属氧化物, 催化机制

CLC Number:

TQ175.75

Wang Xin, Wang Junkai, Huang Zhen-xia, Meng Hao, Wang Yifei, Wen Yanke. Research progress on preparation of silicon nitride by catalytic nitridation[J]. Refractories, 2023, 57(3): 265-269.

王鑫, 王军凯, 黄珍霞, 孟浩, 王一菲, 温研科. 催化氮化制备氮化硅研究进展[J]. 耐火材料, 2023, 57(3): 265-269.

References

[1] 郑彧,张伟儒,彭珍珍,等.高纯氮化硅粉合成研究进展[J].硅酸盐通报,2015,34(S1):344-347.
[2] 刘雄章.纳米氮化硅粉体的制备及其显微形貌分析[D].杨凌:西北农林科技大学,2018.
[3] 赵鑫,王刚,韩建燊,等.氮化温度对直接氮化法制备氮化硅纤维材料显微结构的影响[J].耐火材料,2019,53(6):414-418.
[4] 丁德松,周炳卿,部芯芯,等.氮化硅薄膜的热丝化学气相沉积法制备及微结构研究[J].硅酸盐通报,2017,36(2):706-711.
[5] 白云瑞,邢鹏飞,金星,等.碳热还原法制备氮化硅陶瓷的研究进展[J].铁合金,2021,52(6):25-30.
[6] 刘萍,徐恩霞,谢宏旭,等.氮化硅粉体制备方法研究进展[J].耐火材料,2020,54(5):457-460.
[7] 赵万国,古亚军,李发亮,等.催化氮化制备氮化硅粉体[J].硅酸盐通报,2016,35(4):1106-1113+1143.
[8] PAVARAJARN V,KIMURA S.Catalytic effects of metals on direct nitridation of silicon[J].Journal of the American Ceramic Society,2001,84(8):1669-1674.
[9] PAVARAJARN V,VONGTHAVORN T,PRASERTHDAM P.Enhancement of direct nitridation of silicon by common metals in silicon nitride processing[J].Ceramics International,2005,33(4):675-680.
[10] GU Y J,LU L L,ZHANG H J,et al.Nitridation of silicon powders catalyzed by cobalt nanoparticles[J].Journal of the American Ceramic Society,2015,98(6):1762-1768.
[11] HUANG J T,ZHANG S W,HUANG Z,et al.Co-catalyzed nitridation of silicon and in-situ growth of α-Si₃N₄ nanorods[J].Ceramics International,2014,40(7):11063-11070.
[12] 古亚军,曹迎楠,李发亮,等.铁纳米颗粒催化氮化硅粉[J].硅酸盐学报,2014,42(12):1585-1590.
[13] 古亚军,李发亮,张海军,等.Ni纳米颗粒催化氮化反应制备氮化硅粉体[J].硅酸盐学报,2017,45(1):120-125.
[14] LIANG F,LU L,TIAN L L,et al.Catalytic effects of Cr on nitridation of silicon and formation of one-dimensional silicon nitride nanostructure[J].Scientific Reports,2016,6(1):1-9.
[15] HAN L,WANG J K,LI F L,et al.Low-temperature preparation of Si₃N₄ whiskers bonded/reinforced SiC porous ceramics via foam-gelcasting combined with catalytic nitridation[J].Journal of the European Ceramic Society,2018,38(4):1210-1218.
[16] HAN L,CHEN Y,CHANG H,et al.One-pot foam-gelcasting/nitridation synthesis of high porosity nano-whiskers based 3D Si₃N₄ porous ceramics[J].Journal of the European Ceramic Society,2021,41(12):6070-6074.
[17] ZHANG H J,WATANABE T,OKUMURA M,et al.Catalytically highly active top gold atom on palladium nanocluster[J].Nature Materials,2011,11(1):49-52.
[18] 谢尚栋,孙黎江,朱开阳,等.Ti-Al双金属催化剂制备PEIT共聚酯及其热性能[J].现代纺织技术,2022,31:136-143.
[19] 周兴赟,李文绮,李文,等.Pt/Cu双金属纳米颗粒的制备及其催化制氢活性[J].化学通报,2015,78(3):237-241.
[20] 王小凤,曹迎楠,孙少瑞,等.Au/Ni双金属纳米颗粒的制备及其催化制氢活性[J].稀有金属材料与工程,2015,44(3):753-758.
[21] 黄莎莎,苏亚欣,周夏,等.双金属催化剂Fe-Co/Al-PILC的CH₄-SCR脱硝性能[J].高校化学工程学报,2021,35(6):1073-1081.
[22] 葛伟萍.合金元素对氮化硅制备的影响与研究[D].昆明:昆明理工大学,2003.
[23] 贾碧宏,张锦化,王体珏,等.添加Ti-Si-Fe合金粉对埋碳反应烧结法制备Si₃N₄结合SiC材料性能的影响[J].耐火材料,2019,53(6):441-444.
[24] YANG W L,SHI Z Q,JIN Z H,et al.Effect of oxide additives on catalysis and microstructure of RBSN using low-purity silicon powder as raw materials[J].Materials Science Forum,2011,1386(695):409-412.
[25] GUO W M,WU L X,XIE H,et al.Effect of TiO₂ additives on nitridation of Si powders[J].Materials Letters,2016,177:61-63.
[26] LIU J H,GU Y J,LI F L,et al.Catalytic nitridation preparation of high-performance Si₃N₄(w)-SiC composite using Fe₂O₃ nano-particle catalyst:Experimental and DFT studies[J].Journal of the European Ceramic Society,2017,37(15):4467-4474.
[27] 古亚军,张海军,李发亮,等.原位合成NiO催化硅粉氮化制备氮化硅[J].机械工程材料,2016,40(6):65-68.
[28] 古亚军.催化氮化法制备Si₃N₄(w)-SiC复合材料及其高温性能研究[D].武汉:武汉科技大学,2016.
[29] LIANG F,ZHAO W G,LU L L,et al.Catalytic preparation of Si₃N₄-bonded SiC refractories and their high-temperature properties[J].Metallurgical and Materials Transactions A,2019,50(1):348-356.
[30] 韩磊,赵万国,李发亮,等.Cr₂O₃催化氮化制备Si₃N₄/SiC耐火材料及其性能[J].机械工程材料,2018,42(10):72-76.
[31] HU H L,ZENG Y P,ZUO K H,et al.Synthesis of porous Si₃N₄/SiC ceramics with rapid nitridation of silicon[J].Journal of the European Ceramic Society,2015,35(14):3781-3787.
[32] HYUGA H,YOSHIDA K,KONDO N,et al.Nitridation enhancing effect of ZrO₂ on silicon powder[J].Materials Letters,2008,62(20):3475-3477.
[33] HYUGA H,YOSHIDA K,KONDO N,et al.Nitridation behaviour of ZrO₂ added silicon powder with different ZrO₂ particle sizes[J].Journal of the Ceramic Society of Japan,2009,117(1362):157-161.
[34] HYUGA H,ZHOU Y,KUSANO D,et al.Nitridation behaviors of silicon powder doped with various rare earth oxides[J].Journal of the Ceramic Society of Japan,2011,119(1387):251-253.
[35] JIN X,XING P F,ZHUANG Y X,et al.Function mechanism of Y₂O₃ additive in silicon powder nitridation[J].International Journal of Applied Ceramic Technology,2019,16(4):1407-1415.
[36] MINASYAN T,LIU L,AGHAYAN M,et al.Mesoporous fibrous silicon nitride by catalytic nitridation of silicon[J].Progress in Natural Science:Materials International,2019,29(2):190-197.
[37] ZHAO W G,LIANG F,LIU J H,et al.Enhanced nitridation of silicon powders using in-situ formed La₂O₃ nanoparticles as catalysts[J].Journal of the Ceramic Society of Japan,2018,126(7):510-515.
[38] 赵万国,张海军,段红娟,等.Y₂O₃纳米颗粒催化氮化Si粉制备Si₃N₄粉体[J].稀有金属材料与工程,2018,47(S1):99-102.
[39] 赵万国.Cr₂O₃催化氮化法制备Si₃N₄-SiC复合材料及其高温性能研究[D].武汉:武汉科技大学,2016.
[40] KIM H N,KIM M J,PARK Y J,et al.Characterization of porous sintered reaction-bonded silicon nitride containing three different rare-earth oxides[J].Journal of the Korean Ceramic Society,2021,58(1):77-85.